Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 6 of 6     «   Prev   3   4   5   6
omar

Avatar / Picture

Junior Member
Registered:
Posts: 22
Reply with quote  #76 
Quote:
Originally Posted by Laguz75
You can install the cable in ether direction if you look at the past posts you can see that I used a connector on mine but i tried soldering a screen to the cable like iandvaypes and it is easiesr. Here's a pic of the connector which is the same on the board you can see it makes contact if you put the cable in ether direction


May i know where i can find this connector..need it badly..my connetor got problem..
Frogmod

Member
Registered:
Posts: 58
Reply with quote  #77 
There's a link at the top of the thread on where to get one
kamasi

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #78 
Hello, I need help, I watched the forum on the tape tab from display to display the DNA 20 - DNA 40, does not match any version of cable ffc of the set, you have no idea what band I could use?
Thank you.
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #79 
The colour of the tabs is not enough to identify them https://evolvapor.forumchitchat.com/post/screen-compatibility-psa-7893803
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #80 
Quote:
Originally Posted by kamasi
Hello, I need help, I watched the forum on the tape tab from display to display the DNA 20 - DNA 40, does not match any version of cable ffc of the set, you have no idea what band I could use? Thank you.

What model DNA board is it that you need the screen for?

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
kamasi

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #81 
DNA 20 D, small screen, I want to position the screen on the electronics and I need an extension of the connection between the display and electronics.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #82 
I don't have any first hand experience with that but here's what I think.
The ribbon is soldered on to the board and while it can be replaced it takes considerable skill.
The extension cable will have to be fabricated or a similar ribbon modified and soldered to existing ribbon and board.
You should be able to purchase a new screen for the DNA 20 by opening a ticket with Evolv.
https://helpdesk.evolvapor.com/index.php?a=add

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #83 
@dwcraig1 is correct. The DNA 20D small screen's ribbon is soldered to the board. The only way I think you could add a ribbon extension is to solder the extra ribbon onto the DNA20 ribbon and then solder it to the DNA20D board.  I guess you could find a connector set to solder to the ribbons and connect the extension that way but will still have to solder the extension to the board.  There is no Zif connector on the board.
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.