Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
ej2_sir

Junior Member
Registered:
Posts: 2
Reply with quote  #1 
Hi, struggling with my dna75. In Tc ss316l, the screen just displays 'off' rather than the temp rising..... It still vapes but obviously im not sure its regulating temp? Any ideas? I factory reset not long ago and only changes I have made are case analysis and set the internal resistance (0.004 if i recall). Thanks
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
It is not sensing the resistance rise enough in the first 2 seconds, it wast to see a 185 F raise in temp or it will drop out of temp protection, well partially drop out it still enforces some limits.  It could be a connection issue clean and tighten, disconnect the atty, press fire to clear the atty memory, it could also be an internal wiring or grounding issue.  You mod res seems reasonable.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
ej2_sir

Junior Member
Registered:
Posts: 2
Reply with quote  #3 
Thanks for the suggestions! Gave the 510 and battery cap a good clean with alcohol and it seems better....
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #4 
hello i have big problem with that off message on vt inbox ....every change of coil or is constantly showin off or first second then start to count celzi
us b
ut problem is i set for example 230 or 260 c it wont go higher then 190 then i connect to escribe click restore button hope it go on factory setting then i probably f*** up everithing no second welcome screen first is evolv dna76 then vt inbox no more that second could someone send my plesa ....and tem control doest work  how it should.... does enyone have some link or could send me softweare to upload on mod to work properly please some kind full setup for dna75 or for wire ss316 it is so frustraiting iam not computer guy i dont know how to use all that but so much issues with dna and so more money given for it or someone have knowlage about that and have some will to help me and guide me tru what i must to click we could her over phone over wats upp viber messanger how ever just is there any who can help my i couldnt find enything usefull online my mail is ggunikatni@gmail.com and phone is +385916215075 it will be easyer for bouth and me to describe my issue and you to help me and guide me what to click please if is there any one who is willing to help i am desperate
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #5 
Here is the factory .ecig file for the VT Inbox75...ecig Hcigar_VT_Inbox_75.ecig     
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #6 
what to do with that i have that but what ever i sett it wont work can you please csall me or give me your number i call you

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #7 
In Escribe, go to 'File>Open' and choose the .ecig file & it will load into Escribe. Then click 'Upload To Device'

Edit: Read post #2 above...↨↨
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #8 
em i stupid or what i cant find it where to go haw to set that pllease could you call me over internet social media up is my nnumber

gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #9 
ooooo igot it now i just seting up i will write here if i done it thanks
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #10 
Top of screen in Escribe is...'File'  'Edit'  'Internet'  'Options'  'Tools'  'Help'....Click 'File>Open' the pick the .ecig file...

Capture11.PNG 

Capture111.png 

gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #11 
i do how you sed all i set temperature set preheat set watts i see it have welcome  message inbox weee upčouid to device now lets seeee
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #12 
hmmmm i set 35 w and 230C but still it want go higher then ....150 i i just have dry hit it didnt show me temp protect it was showing when cotton was like dry and thet off is stil there
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #13 
Off means it is switching from 'Temp' mode to 'Power' mode...check all connections...clean 510 on mod & attomizer with alcohol...clean battery terminals inside mod...
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #14 
is it matter in which profile i set ss wire i put on profile 2 on generak card
gogo

Junior Member
Registered:
Posts: 23
Reply with quote  #15 
i šutt screen on profile 2 ohms material baterry  prosent upčoad it wont show me on mod it shows vats and ampers and that off is still there no change in setings just second welcom screen ..........it is clean and 510 and pin everything is so clean buff doesnt stops
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.