Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 3      Prev   1   2   3
flo_46

Junior Member
Registered:
Posts: 17
Reply with quote  #31 
Hey,

So I managed, asking around in my favorite vape shop, to take a peek inside a working C1D2 (if it ever existed [biggrin]) and I took a picture ChunkyButt200, tell what you think before I start heating up the soldering iron...
so here's mine

IMG_2840.JPG 

and here's my the (working) one I got my hands on, they're a slight difference at the C1-C2 area...

IMG_2829.JPG 

If this changes what you thought I should do, let me know !

Thanks a lot.

retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #32 
I still don't understand why you don't contact VapeDroid... they can help you and may even fix it for you... You are spending a lot of time here and getting nowhere imo...
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #33 
@flo_46 most likely just a different revision of the daughter board. i wouldn't get hung up on it.

EDIT....sent you a PM

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
flo_46

Junior Member
Registered:
Posts: 17
Reply with quote  #34 
Hey guys,

So ChunckyButt200 had it right at post #29, the wire was soldered to the wrong pin, since I'm no expert, it took me a few tries but I finally got it right !

Thank you big time for the support !

See you around.

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #35 
Quote:
Originally Posted by flo_46
Hey guys,

So ChunckyButt200 had it right at post #29, the wire was soldered to the wrong pin, since I'm no expert, it took me a few tries but I finally got it right !

Thank you big time for the support !

See you around.

feels good when you fix something yourself, doesn't it?! Sweet deal man. Glad it's working for you.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
xian40

Junior Member
Registered:
Posts: 2
Reply with quote  #36 
hello to you,

what is the hex key size do i need to unscrew the 3 screw on this dna75 c1d2 board? 1 screw is stripped down and i dont know the size i need to order spare screws. i need to open it to fix the same down button issue on mine.

thanks
xian
flo_46

Junior Member
Registered:
Posts: 17
Reply with quote  #37 
hey,

I think it is 0.5 mm  torx. The 1 mm screw driver I tried first  was to big.

hope it helps, good luck to you
xian40

Junior Member
Registered:
Posts: 2
Reply with quote  #38 
thank you. i will try this. i was thinking it was hex head for the screw. they are so small.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.