Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
surgum

Junior Member
Registered:
Posts: 13
Reply with quote  #1 
Hi all, i have problem after updating the lastest escribe software n firmware...
My PC says "usb not recognized"
It is charging, but cannot detected on my pc
Mod Works normal...
I tried to uninstall n install again, but not going better
I try to switch usb port, but it didnt solve the problem
Changing my usb cable, it still the same
Anyone can help?
Thanks
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #2 
Is this with v1.0.42?
surgum

Junior Member
Registered:
Posts: 13
Reply with quote  #3 
Quote:
Originally Posted by BillW50
Is this with v1.0.42?

I updated just 2 hours ago...i think thats the lastest...
surgum

Junior Member
Registered:
Posts: 13
Reply with quote  #4 
Problem solved guys, reboot the mod then plug in usb cable...
brown2292

Junior Member
Registered:
Posts: 8
Reply with quote  #5 
I'm having the same problem with 2 different mods and I have tried 4 different cables including the cables that came with my mods. I have tried rebooting my mods and even hooking them up with no batteries in the and still keep getting the same message. I am using version 1.0.42
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #6 
Are you using a Mac or Windows? And did you try to reboot the computer?
brown2292

Junior Member
Registered:
Posts: 8
Reply with quote  #7 
I have one pc with windows 10 and one with windows 8.1 and both are doing the same thing
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #8 
Oh... I believe the next step is to remove the driver and let Windows to install it again. But I'll do a search and see if I can find anything. Say what DNA200 mods are these anyway?

UPDATE: Did you try these yet?

http://evolvapor.forumchitchat.com/post/dna-200-driver-also-not-recognized-by-windows-7-or-windows-10-7996810

http://evolvapor.forumchitchat.com/post/dna200-refusing-to-connect-8076361

brown2292

Junior Member
Registered:
Posts: 8
Reply with quote  #9 
both mods are rx200 and I have tried removing the drivers and reinstalling them and it does the same
I looked at both forums and did as the first one said and still the same issue as far as the second one goes it is also my post and I have tried it too.
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #10 
Oh the Reuleaux RX200 doesn't work with EScribe software. You need UpdateWismec.exe from the Wismec website to do firmware updates.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.