Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
Grandad

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
Hi all is there not a facility to put USB current on the DNA75 whilst its charging, just a prefrence i like to see i know its on the 200 ?

dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
Gee I had to look, it's there under the screen tab in the charging fields. It took a moment to switch from temp to current on the mods's screen but it works.
It does't show device monitor though only on the mod's screen.

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Grandad

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #3 
Quote:
Originally Posted by dwcraig1
Gee I had to look, it's there under the screen tab in the charging fields. It took a moment to switch from temp to current on the mods's screen but it works.
It does't show device monitor though only on the mod's screen.


Thankyou dwcraig1 appreciated [wink]
Grandad

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #4 
Ive change the settings but still cant get what amps my battery is charging at @dwcraig1
Scarab

Member
Registered:
Posts: 53
Reply with quote  #5 
Check display brightness in "charging mode". If you see warning "Brightness is too low" your display just off after timeout and you see nothing.
Michael Hancock

Avatar / Picture

Member
Registered:
Posts: 48
Reply with quote  #6 
I have not been able to get this while charging. I do not think is a option but I'll look again today.
__________________
Michael Ray
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #7 
Well it appears not to work, I can get it to only display 0's, thought a first it was full charged so I ran it down some and still 0's
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #8 
No the charge chip does not provide an input current reading so the board cannot show it, it's normally around 750-800 mA.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Grandad

Avatar / Picture

Junior Member
Registered:
Posts: 4
Reply with quote  #9 
I looked at the DNA200 settings and assumed the 75 would have the same option but thats not the case, Thankyou all for your replies much appreciated
mactavish

Senior Member
Registered:
Posts: 127
Reply with quote  #10 
Wasted a lot of my time on this. Very few of the options you can choose "when charging" make sense to me. Like "ohms", since I'm CHARGING, why would I care to see ohms, I can see the ohms of an attached atomizer by clicking the fire button.

OK, we now KNOW the more useful option of seeing the USB current is NOT AVAILABLE, as it is on the DNA200, and yes it would be just as useful to see on a DNA75 device as many chargers are not 1-amp chargers, and even if you know and use the right wall charger, many USB cables often don't deliver the proper current. Seeing this information directly on the device would be helpful. Many don't have separate devices to test USB cables and chargers as I do.

So looking at what is available for the three on screen slots when CHARGING, I use:
BATTERY PERCENTAGE
BATTERY VOLTAGE

But don't see any other choice that is useful, so for now I made the third choice: "ROOM TEMPERATURE", just for lack of a more useful option!

Anyone have a BETTER idea for the 3rd choice? If so what would you suggest and why?
THANKS!
gratefulbuddy

Avatar / Picture

Junior Member
Registered:
Posts: 17
Reply with quote  #11 
I agree completely, mactavish. Instead I am using board temp instead of room temp because, like you said, lack of a better option.
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #12 
i have my 75 charge screen set up >

board temp
batt voltage
batt %

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Swainesmatee

Junior Member
Registered:
Posts: 29
Reply with quote  #13 
I sold it but I could have sworn my vt75 was able to display a charging current like the dna 200
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #14 
Quote:
Originally Posted by Swainesmatee
I sold it but I could have sworn my vt75 was able to display a charging current like the dna 200

It has a field called current, but that is the current to the coil.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
sciha

Junior Member
Registered:
Posts: 4
Reply with quote  #15 
Quote:
Originally Posted by ChunkyButt200
i have my 75 charge screen set up >

board temp
batt voltage
batt %


were you able to do it on hcigar vt75?
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.