Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 3      Prev   1   2   3   Next
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #16 
your pack is inline with the 3 cells. they also seem to be balanced. the lipo and fuse seem to be OK. will the device power on, even temporarily, if you HOLD DOWN the fire button (not just press and let go, hold the fire button in) and keep it held in? another thing to try, what happens if you plug in the USB charger and press the fire button? does the device display "check battery"? can you post a screenshot of your battery settings in EScribe?
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #17 
If cable is not conected.....nothing appear on screen....black screen.
If cable is conected....device it turn on and battery shows empty.



device monitor conected to Escribe.png 

RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #18 
When cable conected and i press fire  it shows check atomizer

lip[o settings.png

RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #19 
Question... when cable conected and device it turns on....when i`m screw an atomizer almost it burns my laptop....laptop display fluctuates and a lot of noise on speakers........i unscrewed it fast !!! .... what happened?
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #20 
if cable is not conected and i LONG PRESS fire button.....nothing appear on screen... black screen ...
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #21 
what's happening is the mod, since it sees no battery, is dragging your laptop's USB voltage way down to the point of drawing too much power from the port when you try to fire the atty. basically it's trying to fire the atty by using the USB voltage instead of the battery. don't do that anymore or at least don't use your laptop as the USB power source.

looks like you're running very old firmware. try updating to EScribe 1.2 SP5. the link is at the bottom of this post, in my signature.

if that doesn't work, it could be the fuse. it's hard to tell from the picture but it does look like there is a little discoloration of the fuse.

in that case i would open a help ticket with evolv. that link is also located in my signature.


__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #22 
Firmware update done.
Lipo settings after updated firmware.

lipo settings after updated firmware.png  updated firmware.png

RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #23 
Something happened.... after i updated firmware... on my Device Monitor....cells voltages are not constant.... do you have any ideea?

device monitor after updated firmware.png 

RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #24 
CSV file from device monitor...

 
Attached Files
csv panzer_dna200_problems.csv (12.53 KB, 4 views)

VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #25 
Try bridging the fuse with a pair of tweezers to see if that fixes it.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #26 
Hello, when i am bridging fuse with a pair of tweezers, it appear some sparks and if i press fire button, device turn on and show warranty service.

After i take tweezers off.... device don`t turn on anymore.

What does this means?
Thank you.
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #27 
I don`t know what is the problem with it.

When i disconect Lipo and conect to Escribe.... device turns on but battery bar is empty. When i click fire it shows Check atomizer.

If i try to conect an atomizer, my laptop display flashes and appear a lot of noise on laptop speakers.... 

IMG_9812.JPG 

GrumpyJoe

Junior Member
Registered:
Posts: 5
Reply with quote  #28 
Quote:
Originally Posted by RedLabel
I don`t know what is the problem with it.

When i disconect Lipo and conect to Escribe.... device turns on but battery bar is empty. When i click fire it shows Check atomizer.

If i try to conect an atomizer, my laptop display flashes and appear a lot of noise on laptop speakers.... 

IMG_9812.JPG 


You are trying to fire it using the power from the USB port of your laptop, that isn't enough and you could damage your laptop (hence the noise from your laptop). Either the board or the battery are the problem here. Try checking the lipo on a hobby charger if you have access to one, any local hobby shop should be able to check your lipo. If the battery is bad then your next option should be to return it to evolve for warranty. They are really good about helping.
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #29 
When i changed Lipo with a second one, a good one, device turns on and battery bar is not empty at all ... i conected to Escribe and i made a print screen to Device monitor....

I attached a CSV file with device monitor with my second Lipo.

IMG_9813.JPG  device monitor after updated firmware with second LIPO.png 

 
Attached Files
csv panzer_dna200_problems_with_second_Lipo.csv (31.34 KB, 6 views)

RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #30 
With my second Lipo AND with cable conected to Escribe, it try to charge battery. 
But it shows 0.01A charging .....

IMG_9815.JPG 

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.