Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
GrumpyJoe

Junior Member
Registered:
Posts: 5
Reply with quote  #1 
Hey all, just received my first DNA200 a few days ago and it's the Panzer Box by Think Vape.

Being new to the whole DNA200 scene, I started tinkering in escribe and made a few custom screens up, but that's about all I have really done so far.

The battery is supposed to be a 1500mAh 3S LiPo (SDL823562HP - 1500 mAh according to the manufacturer AD brand made by Shida Batteries) and the watt hours set by the manufacturer 15.  Using the calculator, it should be 16.65, but if I change it, my mod tells me that the battery is only 90% charged when each cell is @ 4.20V.  Any suggestions?

Secondly, the soft cut-off is set to 3.59V, this seems a bit high, so I changed it to 3.3V for now.

Thanks for any help available [smile]

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
Quote:
Originally Posted by GrumpyJoe
Hey all, just received my first DNA200 a few days ago and it's the Panzer Box by Think Vape.

Being new to the whole DNA200 scene, I started tinkering in escribe and made a few custom screens up, but that's about all I have really done so far.

The battery is supposed to be a 1500mAh 3S LiPo (SDL823562HP - 1500 mAh according to the manufacturer AD brand made by Shida Batteries) and the watt hours set by the manufacturer 15.  Using the calculator, it should be 16.65, but if I change it, my mod tells me that the battery is only 90% charged when each cell is @ 4.20V.  Any suggestions?

Secondly, the soft cut-off is set to 3.59V, this seems a bit high, so I changed it to 3.3V for now.

Thanks for any help available [smile]

best bet..........read through the threads here in this forum on the proper way to run battery analyzer, then run it at your avg vaping wattage and that'll give you an accurate batt meter and should charge to  100% most, if not all the time. mine charge to 100% after running the analyzer. also run case analyzer and do a mod resistance test (all of these tests are explained in this forum, do some reading, it'll help). all these analyzers are to make your dna board more accurate with the battery and the enclosure it came in.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
GrumpyJoe

Junior Member
Registered:
Posts: 5
Reply with quote  #3 
I was looking to see if anyone had experience with the Panzer Box.  I did search these forums for that and came up empty.  I have looked on YouTube for videos, but all I came up with were elaborate setups with resistors/blocks and meters.  I will do some more digging, thanks for your input.

Grumpy
Gmdmichael1080

Junior Member
Registered:
Posts: 2
Reply with quote  #4 
WHat should the cell cut off be on the think vape panzer DNA 200
GrumpyJoe

Junior Member
Registered:
Posts: 5
Reply with quote  #5 
The factory cutoff is set to 3.59 but I set mine @ 3.3v.I also ran the battery analyzer finally with two 6" loops of 26ga Kanthal and the end result was 14.6 wh. 
morphflow

Junior Member
Registered:
Posts: 8
Reply with quote  #6 
Hello all,

Does anyone know the mod resistance of the Panzer Box DNA 200?I don't have the tools to run this test and I cannot find it through the manufacturer (Think Vape)

Thanks a lot and happy vaping;-)
Scy123

Junior Member
Registered:
Posts: 20
Reply with quote  #7 
Quote:
Originally Posted by morphflow
Hello all, Does anyone know the mod resistance of the Panzer Box DNA 200?I don't have the tools to run this test and I cannot find it through the manufacturer (Think Vape) Thanks a lot and happy vaping;-)


If you're interested in the tool, you can find it here. http://evolvapor.forumchitchat.com/post/510-99-9-pure-copper-mod-resistance-tools-7835197?&trail=15
Jace

Junior Member
Registered:
Posts: 7
Reply with quote  #8 

Panzer settings from djlsbvapes.com
Battery:

Capacity: 15,85

Electrical:

Mod Resistance: 0,025

Thermal:

Case Cooling Time Constant: 460,91

Case Heating Time Constant: 203,11

Case USB Charge Temperature Rise: 11,75

                                                      14,12

Minimum Ambient Temperature: -20

Maximum Ambient Temperature: 110

dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #9 
Quote:
Originally Posted by Jace

Panzer settings from djlsbvapes.com
Battery:

Capacity: 15,85

Electrical:

Mod Resistance: 0,025

Thermal:

Case Cooling Time Constant: 460,91

Case Heating Time Constant: 203,11

Case USB Charge Temperature Rise: 11,75

                                                      14,12

Minimum Ambient Temperature: -20

Maximum Ambient Temperature: 110

I'm not to sure what to make of the mod resistance, if one of mine come up with a figure like 0.025Ω I'd be tearing it down to find the problem. Isn't that about what he listed for the Hcigar 200 as well?

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
KevinMcc

Junior Member
Registered:
Posts: 2
Reply with quote  #10 
Does anyone know the measurements of the lipo in the panzer I think I found a maxamp 1800 mah battery that will fit it but I'm not sure
gizman

Junior Member
Registered:
Posts: 2
Reply with quote  #11 
Did anyone ever measure the inside the case dimensions for the battery on the Panzer Box 200?  Trying to come up with a replacement or larger mah battery to grab as a spare, I am loving mine so far!
gizman

Junior Member
Registered:
Posts: 2
Reply with quote  #12 
Quote:
Originally Posted by dwcraig1
I'm not to sure what to make of the mod resistance, if one of mine come up with a figure like 0.025Ω I'd be tearing it down to find the problem. Isn't that about what he listed for the Hcigar 200 as well?


Yes it is, I too was concerned, bought a brass plug and checked the mod resistance and came up with .008, not the best I've seen but MUCH better than .025 and my SS temp control is much better since I changed it.
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #13 
Hello again.... i have again problems with my second Panzer box mod DNA200... I think fuse blow.... can you help me?

I will attach some photos and a youtube video.




Thank you. IMG_9796.JPG  IMG_9801.JPG  IMG_9802.JPG  IMG_9803.JPG  IMG_9804.JPG  IMG_9805.JPG  IMG_9806.JPG  IMG_9807.JPG  IMG_9808.JPG

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #14 
do you own a multi meter? you can check to see if there is continuity between the fuse. i would also check the individual cell voltages. could just be a dead lipo pack. what does EScribe's device monitor say for the 3 cell voltages and pack voltage?
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
RedLabel

Junior Member
Registered:
Posts: 26
Reply with quote  #15 
Sorry but i don`t have tools to do that ... [frown]

Here is a printscreen with device monitor.


device monitor conected to Escribe.png 

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.