Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
lubito1

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
Good day

I bought Think vape finder 250w and I was totally disappointed when I discovered that the TC mod is not working with 316L wires.

I've tried downloading setting from steam engine site and getting setting from my friend's mod so far.

But neither of them is working. When I press the fire button the ohm fluctuates up to 1.5 ohm and a message pops up "Temp protected". which indicates that TC mod is not working.

I'm using 316L quad wire. 8 wraps with diameter of 3mm.

Any one have an idea how to solve this annoying issue?

Thanks.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #2 
Can you post a screen shot of the 'Mod' tab in Escribe & one of the 'Device Monitor' while firing with the following boxes checked...Power, Power Set, Temperature, Temperature Set, Cold Ohms & Live Ohms....
lubito1

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
Capture.PNG 

I noticed that my mod is not detecting the temp.

any idea??

retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #4 
Is your Profile 1 set for 316L, Temp not turned off.  Also the Temp protect message means you have reached the set temperature.  It is not an error message.  If it reaches Temp Protect quickly you may have hot spots in your coil build.  You are using spaced coils, right?
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

lubito1

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
My mod is not even detecting temp so it would reach it set temp.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #6 
A hot spot in the coil can reach the temp you set in a very short time triggering the Temp Protect message.  If the device doesn't see a coil as a TC coil then it will fire in power mode... 



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #7 
Quote:
Originally Posted by lubito1


I noticed that my mod is not detecting the temp.

any idea??


Can you post a screenshot while firing the device & one of the 'Mod' tab...
JimScotty0

Avatar / Picture

Junior Member
Registered:
Posts: 11
Reply with quote  #8 
I received my ThinkVape Finder 250w about 2 weeks ago and am using a new Aromamizer Supreme loaded with 2-SS316L Staggered Fused Clapton Coils from UD with it (.07 ohms).  It works fine with TC and is providing a very nice smooth vape as I would hope to expect with this combination. I haven't yet tuned mod resistance, using .004 ohms, or performed the Case Analyzer which I hope to do this weekend.

I have a similar experience with my LostVape Triade 250w with 2-SS316L Staggered Fused Clapton Coils from UD in an OBS Engine atty (.09 ohms). I do dry fire them before wicking and use them spaced as I always do when doing TC no matter which wire type I use.

I am fairly new to SS 316L for my wire type as I have been using mostly my own would Ti or NiFe-52 coils which have worked well for well over a year.

I must say that I am very much enjoying the SS316L and will say there is no problem with the DNA250 (I have 2 of them), using TC which is the only way I vape for well over 2 years now.

You should ensure that you have your build secure and no loose connections, a good atty and you will be good to go.

__________________
Enjoying a warm TC vape on my ThinkVape Finder DNA250, LostVape Triade DNA250, Reuleaux DNA200, or one of 2-HCigar Ti75's with an Aromamizer Supreme using Ti, NiFe52, or SS316L coils. [cool] [wink]
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.