Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Stevens2000ap1

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
Hi people im new around here. I own a triade dna200 which I like alot and work perfect. This week a friend gave me a therion dna75 which is broken and i plan to fix it.

The problems goes as is:
-The mod turn on as it should, i can adjust watt, It WONT connect to escribe but charge via usb cable no problem ( its not the cable i use it for my dna200 no problem)
-when i try to fire, it just say check atomizer, even without any atomizer on it!!

I opened it up and everything at first look fine, was a little dirty but no wire where damaged. I suspect the dna board could be defective. Sound like there was some juice in there that messed everything up.

Any advice?!
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #2 
So, when atomizer is attached it says Check Atomizer? It is normal for a Check Atomizer message with no atomizer attached.,.,...,  Since you have it open check the screws that hold the board in for tightness and make sure you have a good ground at the 510 connector.  Then see if it will connect to EScribe...
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Stevens2000ap1

Junior Member
Registered:
Posts: 4
Reply with quote  #3 
Yes with any atomizer on it will simply says check atomizer. Everything is tight screw in inside and i dont see any cracked weld
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #4 
How about a picture of the board close up? And the 510 connector wiring....
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Stevens2000ap1

Junior Member
Registered:
Posts: 4
Reply with quote  #5 
Quote:
Originally Posted by retird
How about a picture of the board close up? And the 510 connector wiring....


Ok let me redissassemble it ill take couple pictures
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #6 
If you have a meter & seems you will have it open, if you screw an atty onto the 510 connector, check for continuity between the 2 wires where they connect to the board...if no continuity is present, then the issue is on the 510 connector side....if continuity is present, then the issue is board side...

Untitled1_001.png

Stevens2000ap1

Junior Member
Registered:
Posts: 4
Reply with quote  #7 

ok ill have to wait tomorrow so i can bring my multimeter from work here. All my tools are at work. 

ill post up the result here once i do it! thanks

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #8 
Great...will be interesting to learn what you discover...
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.