Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Neloy

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
My recently bought Therion 133 has stopped working. it's display is showing CHEECK BATTERY and a display with watt volt, empty battery along with o amp..... what should i do????
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #2 
Could post a screen shot of the 'Mod' tab & Device Monitor?
Neloy

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
mod (2).jpgmod (4).jpgmod (3).jpg      
It's so nice of u giz_60, thanks for your reply.....
When pressing the fire button it shows the logo, press released and it gets black again, but if u hold the button for long, right after a few seconds... the second ant third (from top) image appears repeatedly until the fire button is released....

Batteries are new and perfectly aligned inside. these works in other mods perfectly. Changed the batteries, no improvement.

changed four tanks and rda's, it responds the same way.

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #4 
contact the vendor about a replacement. what would be really great is if you can find out what cell 1-2 are reading in Device Monitor. that would tell us, for sure, if the board is gone. if one or both cells are reading incorrectly, which i'm guessing is the case, the board needs replacement. 

edit...evolv warranties the board for 1 year from the date of purchase. there is also a lostvape repair center. both links are in my signature.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #5 
Quote:
Originally Posted by Neloy


It's so nice of u giz_60, thanks for your reply.....
When pressing the fire button it shows the logo, press released and it gets black again, but if u hold the button for long, right after a few seconds... the second ant third (from top) image appears repeatedly until the fire button is released....

Batteries are new and perfectly aligned inside. these works in other mods perfectly. Changed the batteries, no improvement.

changed four tanks and rda's, it responds the same way.


Can't tell what is going on by your pictures...a screenshot of the 'Device Monitor' in Escribe will give a better insight as to what the problem is!!
Neloy

Junior Member
Registered:
Posts: 3
Reply with quote  #6 
Quote:
Originally Posted by giz_60


Can't tell what is going on by your pictures...a screenshot of the 'Device Monitor' in Escribe will give a better insight as to what the problem is!!



Therion 133 monitor.png  Therion 133.png

It's not responding to the fire button

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #7 
Thank you, much better info....

Anytime you see a cell voltage as high as #2, then there is an issue with the battery management...as @ChunkyButt200 suggested, you need to contact the vendor you purchase the device from about a warranty replacement , or if that fails, Lost Vape at...http://www.lostvaperepaircenter.com.....Lost Vape warranties their mods for 6 months...
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.