Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Spirometry

Senior Member
Registered:
Posts: 135
Reply with quote  #1 
Why do we have all the accuracy and the ability to make minute adjustments with this chip but preheat punch we have an arbitrary number 1-11? And why 1 - 11, most people would use 1-10.

If I want to set it to 50° below my set temp, what number do I pick?

I request to get rid of the slider and just type in the degree offset i want.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #2 
Think I read somewhere that 1 would be 160F below set point, 5 would be 100F below set point and 11 would be 10F below set point. Don't recall if that is with preheat set to 200 watts.  Disclaimer- my memory is not what it used to be.  John or James can po-po my post with a more accurate explanation. [biggrin]
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

epicwood

Junior Member
Registered:
Posts: 24
Reply with quote  #3 
[47e6da3f3d55454eb44e1094e0782e47] 
Dampmaskin

Avatar / Picture

Member
Registered:
Posts: 79
Reply with quote  #4 
Quote:
Originally Posted by Spirometry
And why 1 - 11, most people would use 1-10.

I'm guessing this is why. [wink]

What I would like to see, was a percentage instead of a fixed preheat wattage. So e.g. with a setting of 300%, when you're vaping at 10W, the preheat is at 30W, and when you're vaping at 50W, the preheat is 150W.

__________________
Steam Engine Wire Wizard with TCR
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.