Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
abraxas

Junior Member
Registered:
Posts: 12
Reply with quote  #1 
hello community, hello evolv!

i'm using gormans trick on my dna75 (thanks for sharing sir) to give my larger builds a little kick without becoming too hot in the end of the draw. its really improving my experience but just functions ~ 4/10 times (the other times the chip recognizes its a non temp sensing wire, punch 11, diff preheat watts).
as the community knows about it for a couple of months and as it would be great to have this as a stable feature i wonder if evolv is able and willing to implement it.

thx, brgds

abraxas

Junior Member
Registered:
Posts: 12
Reply with quote  #2 
really surprised that no other user desires this as a feature too or evolv is interested, but this is absolutly ok. bought a other device as it has this feature. still the dna75 is a great chip for tc. thx
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #3 
[smile]
pe.stefpo

Junior Member
Registered:
Posts: 2
Reply with quote  #4 

I wish you a good day.
Yes prehead would I also appreciate

I'm not going to just all TC

  and Kanthal, it lacks [frown] It would be nice if it was in the sw

sorry for my eng. Google Translate

JoshBali

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
Hi there

Im using the attached material csv and the ecigprofile for Kanthal preheat on my Therion 75 and on the Finder 75 for my Clapton coils to cut down the ramp up time. Its working 100% so far

But appart from this I would appreciate a option to set a preheat punch in non TC profiles too.

 
Attached Files
csv Kanthal_A1_preheat.csv (210 Bytes, 615 views)
ecigpr kanthal_Preheat.ecigprofile (1.33 KB, 507 views)

indrajulian

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #6 
hello

im using VT75 nano

i wanna ask, how to apply khantal a1 setting on escribe?

Thnx

__________________
uyee
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #7 
Download the preheat.csv and add it to materials in the left pane of EScribe's materials then add to mod (right pane) and upload to mod.
materials.JPG 

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
JoshBali

Junior Member
Registered:
Posts: 3
Reply with quote  #8 
After this add the new wire to your Kantal Preheat profile. The pic shown below is from a profile on my Finder 133 but its the same on a DNA75 (except the 80 watts preheat... just make it 75). For big coils like claptons I set the punch to 11. For normal ones 5 or 6 will do...


escribe-preheat.PNG 

indrajulian

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #9 
I have tried, but I have not found the right setting for Khantal preheat

Can you help me

i use KHantal 26 awg

i get 0,58 ohm

how the right escribe setting??

my device HCIGAR VT75 Nano

__________________
uyee
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #10 
My best advice would be to try a different web browser.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
ocky_albert

Junior Member
Registered:
Posts: 1
Reply with quote  #11 
still can`t download
pe.stefpo

Junior Member
Registered:
Posts: 2
Reply with quote  #12 
JoshBali dwcraig1  
well thank you [smile]
Pajomota

Junior Member
Registered:
Posts: 11
Reply with quote  #13 
Hello! It is an urgent implementation Evolv must do. I have been using it from another manufacturer and it is a pleasure to use those big fancy coils with an enormous ramp up time in "no time".
This cheat works sometimes, not always and it is something doable with FW update. Please, EEvolv!!!
Aslanhan

Junior Member
Registered:
Posts: 1
Reply with quote  #14 
Quote:
Originally Posted by Pajomota
Hello! It is an urgent implementation Evolv must do. I have been using it from another manufacturer and it is a pleasure to use those big fancy coils with an enormous ramp up time in "no time".
This cheat works sometimes, not always and it is something doable with FW update. Please, EEvolv!!!


i asked to evolv for kanthal preheat and this is their answer.

"Hello Mehmet,

We have chosen to not offer Kanthal preheat for safety reasons, and it will likely not be available in the future.

Thanks,
Eric D
Evolv, LLC"
abraxas

Junior Member
Registered:
Posts: 12
Reply with quote  #15 

thx for posting this statement. I really appreciate that evolv cares about our safety. I can imagine that preheat with a non temp sensing material would be quiet dangerous.

Maybe somebody can help me (pls don't test it):

I was thinking a lot about how to accelerate the ramp up of my stock kanger dual 0.8 ohm coils (2x 1.6) used in my evod tank without the option of a time based preheat. In the end I thought about buying a dna 200 mod.

Would it help to pump the max wattage (based on the ohms of the coil it should something around 101 watt) in the f*?!%#g tiny coil to get a faster ramp up? Would it affect the lifetime of the coils or the lifetime of my mouth? Would it be dangerous???

I have another question regarding preheat in tc mode:

I'm too lazy to tick the preheat option for temp sensing coils in escribe. How can I solve to get a preheat of 70 watts without using preheat?Would it be nearly the same if I set my powerlevel at 70 watts and the temp at my preferred level?Guess I should get 70 watts for ramp up and then the chips sets the watts to just hold my desired temp – or am I wrong?

Owning a dna 75 mod but just using a joyetech device which I bought after they released preheat for kanthal – it's really a shame. evolv, make an effort and give us preheat for non tc.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.