Evolv DNA Forum
Register Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 4 of 11      Prev   1   2   3   4   5   6   7   Next   »
wahyu93

Junior Member
Registered:
Posts: 1
Reply with quote  #46 
i can't download this file ?


VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #47 
I think it takes a few minutes before the back end system copies your privileges over, try again in 10 mins and pleas let us know if that worked.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
mehmet ayata

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #48 
thnks
tranquocloc.htx3

Junior Member
Registered:
Posts: 1
Reply with quote  #49 
is it for dna 200?
joel

Junior Member
Registered:
Posts: 11
Reply with quote  #50 
Hi Guys,

It ain't working on my Triade - DNA200. Temp climbs as in TC mode but stops at the set power setting... Any clues ?
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #51 
Quote:
Originally Posted by joel
Hi Guys,

It ain't working on my Triade - DNA200. Temp climbs as in TC mode but stops at the set power setting... Any clues ?


Any difference if you increase the power setting? 

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #52 
to add to what @retird is suggesting. two tricks that work for me when the kanthal preheat csv won't work for me........ take note of base resistance and lower it a smidgen in atomizer analyzer, then lock it in (i keep lowering till it works, little by little). turn the punch up to 11. fwiw, this isn't real TC for Kanthal/nichrome. it's intended use is just for a preheat spike at the beginning of your vape.
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
joel

Junior Member
Registered:
Posts: 11
Reply with quote  #53 
@retird and @ChunkyButt200, I'll give this a try and let you know the results.
Thanks for the quick reply - highly appreciated.
Joel.
joel

Junior Member
Registered:
Posts: 11
Reply with quote  #54 
It Works!!! Thanks.[smile]
engmia

Junior Member
Registered:
Posts: 18
Reply with quote  #55 
Quote:
Hi Guys,

It ain't working on my Triade - DNA200. Temp climbs as in TC mode but stops at the set power setting... Any clues ?
That is what is supposed to happen, it's working as intended. This is merely a guide for preheat in Kanthal mode, not postheat.

Preheat generally means the device will fire at a higher (depends on how the particular device/model is set) power burst than the set one for a short period of time at the start.

This workaround is allowing you to enable and customise (since the Evolv software allows it) Preheat in Kanthal.

I'm downloading the CSV file without problems, for anyone having issues though (many people in this thread seem to) -- the original post by @gorman explains simply how to easily implement it on your own device using only the Escribe software. You just need to create a flat temperature curve and change the point values by the minimum possible.

DISCLAIMER: PREHEAT IN KANTHAL CAN BE DANGEROUS! I in no way condone or suggest using preheat in Kanthal mode. The premise here is that high temperatures (even for a short period of time) can cause formation of toxic and carcinogenic chemicals in the vapor which you want to avoid (the reason temperature control was invented).

I understand how this can be an extremely useful feature in certain scenarios (high mass coils that are slow to heat up), however preheat in Kanthal can be unpredictable since there is no limit on the temperature. Use this method only if you know what you are doing, at your own knowledge and risk.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #56 
^^^ Well said
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
yayakuza

Junior Member
Registered:
Posts: 1
Reply with quote  #57 
awesome...
thank you!!!
FtnBttL

Junior Member
Registered:
Posts: 4
Reply with quote  #58 
Hello,

I can't download the files. It says your account will need to be approved, but it's already approved. Can someone help me?
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #59 
Sometimes it takes a little longer for the account to be active..... Welcome to the forum...

Did you get your activation e-mail?

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

FtnBttL

Junior Member
Registered:
Posts: 4
Reply with quote  #60 
Thank you, retird.

Yes I get it 4 hours ago. I think, I should wait some more [smile]
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.