Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 9 of 11     «   Prev   6   7   8   9   10   11   Next
alpkios

Junior Member
Registered:
Posts: 1
Reply with quote  #121 
Thanks man!
3poli

Junior Member
Registered:
Posts: 1
Reply with quote  #122 
thanks
Jeanbo

Junior Member
Registered:
Posts: 1
Reply with quote  #123 
This is a suggestion to evolv. I understand that you don't want to add preheat feature so users with no experience cannot overheat the coil in power mode. So why don't you include instead a '' cool down' feature in power mode.
Is this feature you would create a ''cool down curve'' where the curve has a max of the selected power on the mod.
For exemple
  • 0.5s -20w
  • 1.0s -10w
  • 1.5s  -0w
  • 2.0s  -10w
  • 2.5s  -20w
  • 3.0s  -30w
  • 3.5  -30w
So someone that does not understand the preheat mode will selected a wattage that he would have selected anyway and get a curve below the selected watt.
But the experience vaper, that obviously did create that curve will be able to select on the device a wattage above the watt that he want in order to get the preheat. The wattage selected will be the peak.
In this case. If I want to vape at 70w, I would select 100w. so the curve will be this:
  • 0.5s 80w
  • 1.0s 90w
  • 1.5s  100w
  • 2.0s  90w
  • 2.5s  80w
  • 3.0s  70w
  • 3.5   70w
  • 4.0    70w ....

There you go.... waiting for the firmware update.

Fethi

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #124 
Mine is not working anymore.
__________________
FK & EU
brsdemir03

Junior Member
Registered:
Posts: 1
Reply with quote  #125 
It didn`t work for dna75 hcigar. Where do i wrong ? Please help...
Froggyc

Junior Member
Registered:
Posts: 4
Reply with quote  #126 
I have the same problem too, i upload the profile to device, and there was no preheat. I checked it on device monitor, could you help please?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #127 
Try this:
https://evolvapor.forumchitchat.com/post/show_single_post?pid=1294637859&postcount=112&forum=522111

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #128 
What kind of atomizer are you using? Are you building coils or using pre-built?
Froggyc

Junior Member
Registered:
Posts: 4
Reply with quote  #129 

Quote:
Originally Posted by giz_60
What kind of atomizer are you using? Are you building coils or using pre-built?

superclapton coils 0,3 ohm together (0,6 single) in ijoy combo, i want 75w preheat and after 35w

Froggyc

Junior Member
Registered:
Posts: 4
Reply with quote  #130 
Quote:
Originally Posted by giz_60
 Your not pre-heating to a wattage, but to a temperature. The Kanthal preheat cheat is not a plug & play method, because Kanthal is NOT a TC wire...hence the cheat. You will have to play around with the settings...cold ohms, temp, etc....to figure out what works with your setup! 


i locked ohms and it works, thanks.
pitercios

Junior Member
Registered:
Posts: 1
Reply with quote  #131 
i have a hcigar vt250 with dna250, but this new chip doesnt have preheat, this csv will work on dna250? (sorry for my terrible english jaja)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #132 
Quote:
Originally Posted by pitercios
i have a hcigar vt250 with dna250, but this new chip doesnt have preheat, this csv will work on dna250? (sorry for my terrible english jaja)

it should work on the 250. if it doesn't read through the earlier posts about how to get it working.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Mrmod

Junior Member
Registered:
Posts: 1
Reply with quote  #133 
Quote:
Originally Posted by yoseff
I saw an answer in other topic that i tried and it works!
It deserves to be seen by more people, so i took the liberty to create a new topic with it. It will be in quote, so the person who shared it, get full credit for it:



My friends: This actually is a solution, at least until implemented in firmware!
To make things easier, i share here my already modded kanthal csv file.
(Edit - Also added the ecigprofile i am using on my DNA. I think you can use it and modify to the preheat watts you want)

Thanks gorman [thumb]


why cant i download the attached files?
theatrain

Junior Member
Registered:
Posts: 3
Reply with quote  #134 
Not sure if I have to make a post before being able to download these files, so here's my test (keeps saying my account isn't allowed to perform that action when I try to dl the files from OP)
theatrain

Junior Member
Registered:
Posts: 3
Reply with quote  #135 
Quote:
Originally Posted by theatrain
Not sure if I have to make a post before being able to download these files, so here's my test (keeps saying my account isn't allowed to perform that action when I try to dl the files from OP)


and here's the message

Sorry! You don't have permission to perform this action. Please check your email for instructions on how to begin using your account. You can resend the email if you didn't receive it.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.