Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
JayD_ITA

Junior Member
Registered:
Posts: 2
Reply with quote  #1 

Hello I am a happy owner of dna250.
I wanted to ask some things:

How do I set the preheat in power mode?

In Escribe customizing there are all the "Display variables" but the "last volt" there isn't. How can put it? There is a topic where I can make suggestions for future product versions or firmware?

I can set the "board temperature" and "room temperature" in celsius degrees?

sorry for my bad english and thanks in advance.[thumb]

retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #2 
Work-around for Preheat in Power Mode Topic is here:

https://evolvapor.forumchitchat.com/post/preheat-in-kanthal-it-works-8144287?highlight=preheat+power+mode&trail

I don't recommend this work-around but folks are using it.....  [comp]

You could offer suggestions here for future product/firmware/etc.:

https://helpdesk.evolvapor.com/index.php?a=add&category=5







__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #3 
Quote:
Originally Posted by JayD_ITA
How do I set the preheat in power mode?


Keep in mind that the DNA boards are not designed for pre-heat in power mode, therefore the workaround 'retird' is referring to is a 'CHEAT'...if at first it doesn't work, you may have to fiddle with the settings to get it to work on your device. Read the thread carefully as there is a lot of info on how to tweak the settings to get it to work...[thumb]

Quote:
Originally Posted by JayD_ITA
In Escribe customizing there are all the "Display variables" but the "last volt" there isn't. How can put it?


This option is not currently available...

Quote:
Originally Posted by JayD_ITA
I can set the "board temperature" and "room temperature" in celsius degrees?


That option has been requested a number of times by other users...possibly in a future firmware update...
JayD_ITA

Junior Member
Registered:
Posts: 2
Reply with quote  #4 
I would like to thank everyone for the important tips that were given to me! [biggrin][wave][thumb]
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.