Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
jsayers

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
I have a recently purchased Therion DNA75 I am having issues with it in temperature control.
All of my wire is SS316L at the moment so that is in all of my builds.
No matter which RDA , RTA or build I use the board reads "OFF" when I press the fire button. The mod stills fires, I assume with straight wattage as if it was in Kanthal mode.
All of the builds work fine on my Triade so I can't see that being an issue.
I have tried different gauges of wire and resistances between .16 and .4 without success.
My gut tells me the 510 or board connections might be suspect.
I have not tried a hard reboot but that might be my next move.
Lost vape said they would repair it but the turn around is 3-4 weeks.
If it could be something simple I would rather fix it myself than lose it for a month.

Anyone else have this issue?
jsayers

Junior Member
Registered:
Posts: 3
Reply with quote  #2 
Never mind, I just saw the earlier post on the same issue.

Going to load up a new profile now!
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #3 
Is Temp turned off in your profile?  I guess you have Temp Dominate checked in the profile...
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

jsayers

Junior Member
Registered:
Posts: 3
Reply with quote  #4 
Uploaded the ss316L csv from DJaquith V7 and problem is solved!!
The csv from lost vape was all jacked up!

Thanks forum!!
jurdanas

Senior Member
Registered:
Posts: 100
Reply with quote  #5 
Evolv SS316 curves work well, to me, no need speed.
2legsshrt

Senior Member
Registered:
Posts: 120
Reply with quote  #6 
From what I have heard the profile for SS316L from Lost Vapes was way off. I did like you and changed that profile as soon as I got it. I used the .csv from Steam Engine which worked well for me. On the Therion thread at ECF so many complained about the profile I didn't even bother with it. But I use SS316L in TC works perfectly.
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #7 
What was the fix for this? Are you not supposed to have temp dominate checked? I'm using ss316l from steam, and it reads off no matter what build or atty.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #8 
Quote:
Originally Posted by cgagne
What was the fix for this? Are you not supposed to have temp dominate checked? I'm using ss316l from steam, and it reads off no matter what build or atty.


Can you post a couple of screenshots from Escribe...'Mod' tab & the device monitor while firing with the following boxes checked...power, power set, temperature, temperature set, cold ohms & live ohms...
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #9 
I definitely will. I work night shift, so I'll probably get a chance to post on the morning.....Thanks !
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #10 
[thumb]
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #11 
No matter what I do, what settings I change, when I run the device monitor, temp doesn't even register. Temp control doesn't work.

Attached Images
jpeg 20170404_124548.jpg (300.13 KB, 9 views)
jpeg 20170404_124519.jpg (273.34 KB, 8 views)
jpeg 20170404_124425.jpg (299.61 KB, 7 views)
jpeg 20170404_124346.jpg (403.51 KB, 7 views)
jpeg 20170404_124339.jpg (353.32 KB, 7 views)
jpeg 20170404_124318.jpg (299.67 KB, 6 views)
jpeg 20170403_112303.jpg (120.96 KB, 7 views)
jpeg 20170403_112252.jpg (114.91 KB, 6 views)
jpeg 20170403_111838.jpg (118.03 KB, 6 views)
jpeg 20170403_111555.jpg (127.75 KB, 5 views)
jpeg 20170403_082657.jpg (85.25 KB, 0 views)

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #12 
'Off' means the device is switching to Power mode...your resistance is not stable...first screen shot, .330...second screen shot. .335 & while firing, it should never drop as it is in both screen shots...make sure atty is cold before setting the cold ohms...need to check all connections...tight screws...clean 510 (atty & device)...Mod resistance needs to be checked & set...case analyzer needs to be run...the device HAS to be set up properly in order for TC to work...especially when using SS
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #13 
I've cleaned everything with rubbing alcohol. The screws on my goon 24 are as tight as I can get them. Mod resistance says zero? And unfortunately all the other stuff is like speaking Spanish to me. Lol. It just sucks, I like temp control, but wish I didn't get a dna. I didn't realize it was going to be this difficult. I need a cigarette after every time I mess with this thing....smh. kind of defeats the purpose.
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #14 
I appreciate you trying.....im just hopeless. Plus it doesn't help I'm computer illiterate.
cgagne

Junior Member
Registered:
Posts: 17
Reply with quote  #15 
In the battery part. I'm running 25r's and LG brownies.....should my capacity be 18.5? Cell soft cutoff 3.09v?
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.