Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
MIsterious Vaper

Junior Member
Registered:
Posts: 17
Reply with quote  #1 
i sent my unit up with a 2 cell 18650 i am curently running a 0.29 ohm build and at 100 watts and keep getting ohms too high with any watts over 88.6 watts any info would be helpful
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
just putting this out there, the max output when in 2s mode is 6 volts. 100w @ .29 ohms comes to around 5.39v. what you have your mod resistance will come into play as well. in device monitor, with the atty voltage checked, what is the voltage when firing your .29 build at 100w? is it close to the 6v limit? also, here's a thread that might offer some help.


http://evolvapor.forumchitchat.com/post/ohms-too-high-on-power-mode-8081656?trail=15

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #3 
It's partly the 6 V output voltage limit with 2 cells, I would expect you could get more power so probably your batteries are struggling or you have a connections issue, you should be able to get 120 W with 0.29 ohm and good batteries and connections.

A bit more info http://evolvapor.forumchitchat.com/post/tungsten-vapers-8050705?pid=1291725974

Is it better with fully charged batteries?

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
MIsterious Vaper

Junior Member
Registered:
Posts: 17
Reply with quote  #4 
it does this with freshly charged batteries (sam 25r green )i have read thru what i have been able to find on here as for voltage i am firing at 5.43 volts at 100 watts i have also did a case analyst as well as atty to correct for resistance i have just become lost as what else i could do 

VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #5 
You could have a look at how the cell voltages are affected in device monitor.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.