Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #16 
If it is too low you need EScribe or an external balancing battery charger capable of doing a recovery charge process.

Lets try something....

With no usb cable hooked up to the computer start EScribe....  When EScribe comes up click on Evolv DNA200 in the left column.  When the DNA200 screen comes up then plug the USB cable into the device first and then plug the USB cable into the computer...  Does  a small window pop up and say  "Connect"  Device?

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

raymiebear11

Junior Member
Registered:
Posts: 13
Reply with quote  #17 
nothing shows up mate
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #18 
OK.... I took three of my Samsung USB cables (S3, S4, and Note 5) and they all worked just fine with EScribe. I've only a couple other questions.  What version of EScribe are you using and what language, and where did you download it from?  Have you got more than one USB connection on your computer and you tried using each one of them?



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

raymiebear11

Junior Member
Registered:
Posts: 13
Reply with quote  #19 
I got escribe off there actual site version am running is 1.2 sp5.2 I've it set to englisb I've tryed all 4 USB slots on my computer
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #20 
OK  uninstall EScribe and when you reinstall it make sure that you have "drivers" selected in the options before you start the install.  You may not have installed the drivers when you installed EScribe.



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

raymiebear11

Junior Member
Registered:
Posts: 13
Reply with quote  #21 
installed it all again it downloaded a package I'll try what you said above again now see if it works out
raymiebear11

Junior Member
Registered:
Posts: 13
Reply with quote  #22 
now when I plug the USB into the dna then into the laptop it's flashing on the dna evolve dna 200 :/
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #23 
What happens when you run EScribe with the device plugged in...does the device show up in EScribe and can you open Device Monitor?
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #24 
Going off-line till tomorrow.... will read any posts you put up when I return... maybe others will pop in and help as needed in the interim...  [smile]
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

raymiebear11

Junior Member
Registered:
Posts: 13
Reply with quote  #25 
dna doesn't show up when plugged into the laptop doesn't let me open device manager on escribe because the dna won't sync or charge
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #26 
hum.... you might contact Lost Vape or the person you got it from....I've ran out of choices... sounds like issue with device/board or build that you won't be able to fix.  Lost Vapes Repair Center.... link below  (not sure if they have a repair center outside the USA)

http://www.lostvaperepaircenter.com/




__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.