Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Fumblefingers401

Junior Member
Registered:
Posts: 2
Reply with quote  #1 
Is it possible to wire a light emitting diode (lighted momentary switch) so that it lights up when the dna 250 screen is lit rather than just when the mod is fired?
I apologize if I missed some easy answer on Google for this..
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
Quote:
Originally Posted by Fumblefingers401
Is it possible to wire a light emitting diode (lighted momentary switch) so that it lights up when the dna 250 screen is lit rather than just when the mod is fired?
I apologize if I missed some easy answer on Google for this..
it might be possible. You would have to probe the end of the screen ribbon flex connector on the board to find Vcc and Vss (pos and neg). Solder on tiny wires to the corresponding spots and run them to the LED. Just know the voltage that powers the screen is variable. This is voltage depends on your screen brightness level and fade in-out settings. This might also void your warranty, soldering to points in the board that aren't supposed to be soldered to.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Fumblefingers401

Junior Member
Registered:
Posts: 2
Reply with quote  #3 
That's what I was thinking and I don't want to do that but I was hoping there was something I missed. Thanks for the reply!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.