Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 6 of 49     «   Prev   3   4   5   6   7   8   9   Next   »
Always_Jonezen

Member
Registered:
Posts: 46
Reply with quote  #76 
Quote:
Originally Posted by VapingBad
Quote:
Originally Posted by Always_Jonezen
Here is my first try Hammond 1590g, I messed up on the Usb hole. I will be making some more, I have 5 more boards coming tomorrow hopefully.

Well done, but it looks like you have the thin & thick wires in the wrong places, the thickest is normally for the output not the battery.


Thank you, the battery came with 14ga and I used what I had which was 20ga. I'm working on 5 more this week and I will take your advice.
speedometerman

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #77 
Thought I would try Lexan........


Always_Jonezen

Member
Registered:
Posts: 46
Reply with quote  #78 
Quote:
Originally Posted by speedometerman
Thought I would try Lexan........



Those are nice and interesting, buy or make those lexan cases
Wick

Avatar / Picture

Member
Registered:
Posts: 64
Reply with quote  #79 
Quote:
Originally Posted by asg
I posted this over on ecf in the dna200 thread, but figured it belonged here as well:

Finished this mod a few days ago, just got around to taking a few pictures. Meet the lego200:

lego200_1.jpg
lego200_2.jpg
lego200_3.jpg 
lego200_4.jpg 
lego200_5.jpg 
lego200_6.jpg

Wiring inside is 12 gauge to the 510, 16 to the battery. The extra XT60 in there is between the dna200 and the 510, since I wanted things to be modular (this being lego and all). The 510 is from fasttech, basically a varitube clone. Battery is a Turnigy nano-tech 1000mah 3S 25~50C. Everything else is lego including the button actuators, chip holder, screen mount. No glue, only a small bit of double sided tape to hold the screen. The only cut into the lego was for the 510 (a hole for the threads, and a recess for the top plate.

The style plates attach onto the side. So far I've made the two seen in the pictures, but I will likely make a few more. And I need to find some mounts in black. The grey ones stand out when the plates are off (they are completely hidden when they are on though).

Been using it at about 50W mostly, 410F - 430F, preheat set to 200W 1sec. Vaping great. Now I just need to keep myself from ordering more dna200's.


The Lego build is RAD!!!!
KTMRider

Avatar / Picture

Moderator
Registered:
Posts: 188
Reply with quote  #80 
speedometerman

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #81 
JoneZen, I made the Lexan enclosures.
pittsme

Junior Member
Registered:
Posts: 5
Reply with quote  #82 
Opus_1.jpg 
pittsme

Junior Member
Registered:
Posts: 5
Reply with quote  #83 
Opus_5.jpg 
Cotay

Avatar / Picture

Junior Member
Registered:
Posts: 22
Reply with quote  #84 
Here is my first print design that has been shared on ECF.  It is designed to work with the Hyperion G6 900mAh.  With 3mm-4mm walls it is very solid and nice to hold.  I will be switching out the flat buttons for rounded ones on Monday.  I haven't finished the build yet, so here is a pic of it powered up via USB next to an SX Mini S-Class.

[20150724_023241] 

Here it is next to a Roku remote before I fit the board and screen:

[20150723_200801] 
blueridgedog

Avatar / Picture

Moderator
Registered:
Posts: 573
Reply with quote  #85 
Assembly of a test shapeways print:

2015-07-24 15.26.56.jpg  2015-07-24 15.49.21.jpg   

blueridgedog

Avatar / Picture

Moderator
Registered:
Posts: 573
Reply with quote  #86 
Quote:
Originally Posted by Always_Jonezen
I used what I had which was 20ga. I'm working on 5 more this week and I will take your advice.


I had to use 20ga for the atomizer as well for now as I am waiting on additional wire (literally on a slow boat from China).  To deal with that I set the pre-heat wattage to 80.  I will open it up once I solder in the correct wire, though with a 1 second punch, theoretically I could go more, but there is no reason to push it.
Always_Jonezen

Member
Registered:
Posts: 46
Reply with quote  #87 
Quote:
Originally Posted by blueridgedog
Quote:
Originally Posted by Always_Jonezen
I used what I had which was 20ga. I'm working on 5 more this week and I will take your advice.


I had to use 20ga for the atomizer as well for now as I am waiting on additional wire (literally on a slow boat from China).  To deal with that I set the pre-heat wattage to 80.  I will open it up once I solder in the correct wire, though with a 1 second punch, theoretically I could go more, but there is no reason to push it.

I have the cover off and chain vaped at 500° 200watts and the wire seems to be fine but I will change it out also on Tuesday when my wire comes in.
mejcf

Junior Member
Registered:
Posts: 1
Reply with quote  #88 

My DNA200 ;-)

1.jpg  1a.jpg  3.jpg  4.jpg  5.jpg  6.jpg  7.jpg   


speed4mee

Member
Registered:
Posts: 42
Reply with quote  #89 
I think this is a ModMakerBox 846024 [biggrin]
RickAdair

Member
Registered:
Posts: 40
Reply with quote  #90 
My 2nd box. Nothing special.

Attached Images
jpeg image.jpg (1.30 MB, 218 views)
jpeg image.jpg (1.35 MB, 226 views)

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.