Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
ClintMaas

Avatar / Picture

Junior Member
Registered:
Posts: 18
Reply with quote  #1 
   I looked through the other two or three posts about the LED and mine is working great however, just a couple questions I didn't seem to find in them.
   Are the small pads above and below the fire button active high in both locked and unlocked mode?  
   I soldered mine directly to the fire button and i don't mine it lighting even in locked mode but just curious.
  And lastly, is there a safe current limit to be putting on the fire button connection point (or small pads). 

  Thanks ahead of time and just want to confirm these things since a few of our group members are also interested in doing this.


DNA 200 LED.jpg 2016-04-09 23.28.02.jpg   

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
the set of solder pads under and to the right of the fire button are for the charging led. only activated when usb is plugged in and charging. this led is also dimmable through escribe in the charging screen brightness selector. the set of solder pads directly across from the charging led pads, to the left, and the pads at the top and to the right of the button are activated whenever the fire button is pressed.  not sure on the current limit. i wouldn't compound a big number of leds to any set of pads. just what is needed. hope this helps. i would ask evolv about the current limit of the pads if you really need to know.
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
ClintMaas

Avatar / Picture

Junior Member
Registered:
Posts: 18
Reply with quote  #3 
I may have to add another for then it's charging.   I'm guessing that output is 5v?     I'll have to get the meter out later and check.    But I do like how the vaporshark shows it's charging.
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #4 
johnathan hillstrand confirms the charging led pads voltage is 5v, lol. however, i think i'm complete liar in my previous post about the charging led. for the life of me, i thought the brightness of the red charging led was adjustable in escribe through the charging screen brightness slider. i just now set the charging screen brightness from 0% to 100% and everything in between and cannot tell any discernible change in brightness of the red led. i do plan to take my VS 200 apart to check a few things out, just not any time soon. still under warranty. 
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.