Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #1 
in stand by with no atty on...I get the "too hot" message when fire button is pressed.  Anyone know a fix for this?
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
hi Scott. can you post a screenshot of Device monitor with the "board and room temperature" boxes ticked. you might try and re-flash the current firmware you're using.
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #3 
it is reading 110 room temp...how do I reflash?

thanks for reply
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #4 
i'm actually more interested in board temp while sitting idle.  

with your DNA 75 connected, in EScribe's top left hand corner "TOOLS" - "APPLY SERVICE PACK" - open the DNA 75 service pack list - select the current firmware you are running on your DNA 75. it will reinstall the FW. this may or may not fix it. most likely not but worth a shot.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #5 
it is off the charts gibberish....
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #6 
I did the service pack update...seems to not have helped.  Still get too hot when pressing fire button
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #7 
here is graph shot

Attached Images
png graph.png (6.74 KB, 15 views)

Wayneo

Senior Member
Registered:
Posts: 296
Reply with quote  #8 
A full print screen. All the information is valuable 
__________________
My old tired eyes don't look at skewed, moire filled cell phone photos. Printscreen - Sniping tool or [ALT]+[PRT SCN], open MSPaint and paste [CTRL]+[V]
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #9 
It does not include statistics in screen shot for whatever reason if that's what you mean.  I click the screenshot button and that's what it gives me

Attached Images
png graph2.png (8.90 KB, 15 views)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #10 
yep, sorry Scott, one of the board's on-board temp sensors has failed. is mod ridiculously hot to the touch? either way the board needs to be replaced. is the warranty from the vendor you purchased the mod from still good? if not, evolv warranties the board for 1 year from the date of purchase. i would contact Volcano first and if they don't help you, contact evolv and open a help ticket. link is my sig.


edit... you get ejuice inside the mod? that could be affecting the sensor.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #11 
Thanks chunkybutt.... Figured it was toast. The board is soldered... Will I have to tear it apart or ship the whole mod to evolve? I already opened a ticket... Just trying to get a jump on things. This device is past warranty... The chip is not
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #12 
Quote:
Originally Posted by Scott Novosel
Thanks chunkybutt.... Figured it was toast. The board is soldered... Will I have to tear it apart or ship the whole mod to evolve? I already opened a ticket... Just trying to get a jump on things. This device is past warranty... The chip is not
wait for response first from evolv. they may have you send in the entire device. either way, they'll get you back up and running.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Galang

Junior Member
Registered:
Posts: 3
Reply with quote  #13 
i have similar problem like u scott, now how was your mod , is already repaired ??
Scott Novosel

Junior Member
Registered:
Posts: 8
Reply with quote  #14 
I've been too lazy to mail it out... But evolve is all over it. You mail the whole mod in and they take care of it. I imagine if it's under 1 year warranty... Your good to go
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #15 
Quote:
Originally Posted by Scott Novosel
I've been too lazy to mail it out... But evolve is all over it. You mail the whole mod in and they take care of it. I imagine if it's under 1 year warranty... Your good to go


Yep, sometimes they ask for the device and other times they ask for the DNA board.... let us know how it goes...

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.