Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 5 of 5     «   Prev   2   3   4   5
mstave

Member
Registered:
Posts: 35
Reply with quote  #61 
Update on my Mod (VT 166).  Sent it in to Nick at Evolv to look over.  Just got the word that they are "working to repair it" and will send it back to me when finished.  No word on what they found, as of yet.  Beginning to think this may not be an issue with the SP, but not yet ready to install the latest SP in my newly arrived Therion 167.......
EDMKEV

Junior Member
Registered:
Posts: 10
Reply with quote  #62 
Quote:
Originally Posted by mstave
Update on my Mod (VT 166).  Sent it in to Nick at Evolv to look over.  Just got the word that they are "working to repair it" and will send it back to me when finished.  No word on what they found, as of yet.  Beginning to think this may not be an issue with the SP, but not yet ready to install the latest SP in my newly arrived Therion 167.......


Ya ever since ive read these issues i havnt done anything with my reuleaux or my VT167..i just dont wanna take a chance untill we get some more info on whats going on exactly before i update anything on either mod. Hopefully this will shed some light on the issues.
Modbustersecig

Avatar / Picture

Member
Registered:
Posts: 73
Reply with quote  #63 
Quote:
Originally Posted by EDMKEV


Ya ever since ive read these issues i havnt done anything with my reuleaux or my VT167..i just dont wanna take a chance untill we get some more info on whats going on exactly before i update anything on either mod. Hopefully this will shed some light on the issues.
I know that felling Nick has taken good care of my problems. I used the up date from 02/2016 and all the mods I work on seamd to be pretty good then when the early release started to come I was going throug boards faster than cotton DNA 200 got a couple DNA 250 to try one failed right off the get go .never did find out why on three cell using SP 5. that was the last and only problem I had with DNA 200 or the DNA 250 they are all working great .with SP. 5 hard to believe 5 months ago I was ready to go back to a mec mod .but I am hooked on temperature control and the Evolv boards and the fact they have customer service second to none .

__________________
Any one seen the fire extinguisher I don't believe that's vapor
mstave

Member
Registered:
Posts: 35
Reply with quote  #64 
Nick has just advised me that my mod issues were related to a bad board, and not, in his opinion, to he SP.  They have replaced the board and are sending me the mod back, and asking engineering to review the bad board to figure out what happened.

Overall, great service and I am happy.  Gonna install the service pack in my new THerion 167

EDIT: Installed the new SP, went perfectly, new mod is ticking away with no difficulties from the SP
EDMKEV

Junior Member
Registered:
Posts: 10
Reply with quote  #65 
Quote:
Originally Posted by mstave
Nick has just advised me that my mod issues were related to a bad board, and not, in his opinion, to he SP.  They have replaced the board and are sending me the mod back, and asking engineering to review the bad board to figure out what happened.

Overall, great service and I am happy.  Gonna install the service pack in my new THerion 167

EDIT: Installed the new SP, went perfectly, new mod is ticking away with no difficulties from the SP


Sweet thats good news and thats the newest version 1.2 SP 5.2? I guess i better go ahead and give it a try! Never had a serious issue to have to deal with evolv directly but good to know they take care of their customers.
Handyman

Junior Member
Registered:
Posts: 4
Reply with quote  #66 
I had the same problem with my VT133 today. 0 volts on cell 1, 5.22v on cell 2.

Same exact behavior as olegasan shows in his video here.

This occurred randomly today. I haven't even connected the mod to Escribe in a couple of months, so it seems to have nothing to do with the service pack upgrade.

While troubleshooting, I connected the mod to Escribe and upgraded to sp5.2, but the problem persists.

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #67 
Quote:
Originally Posted by Handyman
I had the same problem with my VT133 today. 0 volts on cell 1, 5.22v on cell 2.

Same exact behavior as olegasan shows in his video here.

This occurred randomly today. I haven't even connected the mod to Escribe in a couple of months, so it seems to have nothing to do with the service pack upgrade.

While troubleshooting, I connected the mod to Escribe and upgraded to sp5.2, but the problem persists.

i would contact the vendor you purchased the mod from if it's still within their warranty. if not, open a help ticket with Evolv. the link is in my sig at the bottom. i don't think up/downgrading the firmware is what causes the board to fail and read the cells incorrectly. it's something else.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.