Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
DownOhmBoy

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
Any idea when we will be able to have kanthal at 200watts
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
Just set the kanthal limit in Escribe - mod tab - electricial - Kanthal power limit
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
DownOhmBoy

Junior Member
Registered:
Posts: 4
Reply with quote  #3 
Lol ok i see know thanks much appreciated 
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #4 
You're welcome
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
alee132

Senior Member
Registered:
Posts: 112
Reply with quote  #5 
Why does my mod say kanthal limit 100 when I am not even on kanthal but in temp mode with ni200?  Does the kanthal limit setting also apply for ni200 or any wire infact?  If so that settings name is very misleading.
John

Avatar / Picture

Administrator
Registered:
Posts: 500
Reply with quote  #6 
It definitely should not say it or limit you with a nickel coil. That would be a bug.

Can you post a device monitor plot of a hit where you are temperature controlling and it limits to 100 watts? Plot the output power and the temperature.

Thanks
John
basilray

Member
Registered:
Posts: 36
Reply with quote  #7 
Quote:
Originally Posted by alee132
Why does my mod say kanthal limit 100 when I am not even on kanthal but in temp mode with ni200?  Does the kanthal limit setting also apply for ni200 or any wire infact?  If so that settings name is very misleading.


Likely a build issue, or a connection between the mod and atomizer issue.  If the device can't accurately get a reading on the fluctuation in resistance, it will assume it's kanthal and the wattage limit will kick in.
John

Avatar / Picture

Administrator
Registered:
Posts: 500
Reply with quote  #8 
Probably, so add live ohms to the device monitor graph to save and post when it is doing it. With that we can know exactly what is going on.

Also, what firmware version?
James

Avatar / Picture

Administrator
Registered:
Posts: 304
Reply with quote  #9 
alee132, it will not show Kanthal Power Limit if it has detected as temperature-controlled.
Are you running a very high-thermal-mass atomizer at a low wattage by any chance?
Vape_Like_A_Boss

Member
Registered:
Posts: 65
Reply with quote  #10 
Yeah looks like you got it fingered out, but I figured I'd add that I don't have problems in the 120-150 range, and I've run it at 200 for craps and giggles, so it's something on the custom setting side most likely. I didn't want someone to run across this and start posting all over the place that the chip wont run Kanthal over 100 watts.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.