Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
iPHAILZ

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
1.0.42 Escribe 
Releaux dna 200

Hello,

I have just updated to this software version and now on my profiles when i switch through them there are 2 lines of text.

The 1st being what i wanted it to be and what i entered in the "name" section of the profile but underneath it will say a wire type that is wrong. For example "NICKEL 200" when in fact the profile is set to 50w with temp sensing turned off.

This didn't happen with the previous software, how am i able to fix this please?


blueridgedog

Avatar / Picture

Moderator
Registered:
Posts: 573
Reply with quote  #2 
Verify you have the language you want on the profile tab in escribe, that the wire type is selected correctly and for non-temp wires you have checked/unchecked the right box.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #3 
I found it easier to remove all the existing profile entries and start fresh after updating to the firmware that has the materials tab than to try to correct them.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
iPHAILZ

Junior Member
Registered:
Posts: 4
Reply with quote  #4 
Hi,

Thanks for that.

This is a basic 35w profile i use for Kanthal attached.

I think the temp sensing is off but maybe the coil material part that is greyed out is what is making the text?

I can't seem to change it to Kanthal either, only nickel, SS or titanium. Do i need to add a kanthal profile in materials or something? dna.PNG 

dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #5 
You can get them (various) from Steamengine, add them to EScribe then add them to the mod and upload.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #6 
Try adding Kanthal here and then check the grayed out Coil Material box again...

Untitled.png 




__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

iPHAILZ

Junior Member
Registered:
Posts: 4
Reply with quote  #7 
Thanks all, fixed!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.