Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 4      1   2   3   4   Next
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #1 
Please don't ask to see graphs. I have spent 3 days with a total of 26 hours reading every post on this issue. I have done the atomizer, mod temp and battery calibration twice and every time I load my profile, the wattage will not adjust for the temperature. I have totally given up on this mod. I have the Drone (250 chipset) and no issues with temp mode. I have a BF Odis 16 atomizer that was bought specifically for this mod which needs temp mode to avoid dry hits as there is virtually no juice well. I am not a happy camper with this DNA 75 chipset

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #2 
Sorry to hear you are having issues but, you obviously don't have something set up correctly. What do you mean when you say the "wattage will not adjust for the temperature"? Not being able to see your mod, you are going to need to post some screenshots if you need help. The 75 works very well in temp mode, if everything is set up properly...
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #3 
pic 1.PNG 
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #4 
wire.PNG 
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #5 
cap 3.PNG 
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #6 
I honestly think my chip is defective. I love Lost Vape products

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #7 
Quote:
Originally Posted by Little Brat
wire.PNG 


Is this the wire profile you are using for Profile 1?
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #8 
Can you post a screen shot of Device Monitor while firing with the following boxes checked...Power, Power Set, Temperature, Temperature Set, Cold Ohms, Live Ohms...
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #9 

it does not read the coil temp at all

Cap5.PNG 


Spirometry

Senior Member
Registered:
Posts: 135
Reply with quote  #10 
That material profile needs to be renamed NI200
Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #11 
works perfectly on the Drone

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #12 
As @Spirometry stated, that is the wire profile for Nickel...not SS
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #13 
Try changing the wire type in Profile 1 to the SS316 wire profile...the is the Evolv default & see what happens
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #14 
You might compare my SS316L material profile to the profile you posted.... they are quite different.... guess you made that profile????

Untitled.png 


__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Little Brat

Junior Member
Registered:
Posts: 27
Reply with quote  #15 
okay I see the temp now by setting it to Ni200 but it is way off from actual temp Cap6.PNG 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.