Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
injen

Junior Member
Registered:
Posts: 21
Reply with quote  #1 
Hello ppl, has anyone run the case analyzer to vt 75 to import to my device ? It constantly hits temp protection and the vape is weak , i now use a sx mini q class and vaoes like train with the same wattage .
I searched every possible setting in escribe but cant make my mode perform like the sx mini and i m really dissapointed because i love my vt75.
So cant anyone upload his ecig file ?
Thank you in advance
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
Have you tried turning the temp up, DNAs regulate very differently from SX mods, DNAs will give you a steady temp, SXs will repeatedly turn the power you set on and off to get the average temp and IME that is a lot harsher and bit hotter vape.  See pBusardos recent comparison video.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
injen

Junior Member
Registered:
Posts: 21
Reply with quote  #3 
thank you for your reply , the temp limit on sx mini is 215c and on my vt 240c
i think that with 240c would be ok but still hitting temp protection , the atomizer i use is a Kayfun v5 , both mods reads the same resistance
I desperately want my vt to work properly with temp control and i cant find a way to make it happen
skineedog

Member
Registered:
Posts: 53
Reply with quote  #4 
See the attached. You'll need to change the file extension. Just delete the '.csv' off the end. My device works great with SS. I might question the atty even though you said it works great on your other device....

 
Attached Files
csv VT75.ecig.csv (3.99 KB, 379 views)

injen

Junior Member
Registered:
Posts: 21
Reply with quote  #5 
Thank you very much i ll check asap
KTMRider

Avatar / Picture

Moderator
Registered:
Posts: 188
Reply with quote  #6 
You could try rebuilding your coil. Sounds like you might have a hot leg. 
injen

Junior Member
Registered:
Posts: 21
Reply with quote  #7 
No i tried several builds with no luck , the mod reads the resistance at 0.10 and it vapes weak with the temperature protection kicking like hell, i make coils with 26 ga ni200 from ud 9 wraps on kayfun 5 at 25 watt and 35 preheat at 1 second but no matter what i do it doesnt vape like the q class , if i press the fire button and lock the resistance at 0.11 then the temperature protection doesnt kick so aggressively but that is note right.
I dont know what else to do to make it play and as i said i love the vt75
James

Avatar / Picture

Administrator
Registered:
Posts: 304
Reply with quote  #8 
Do you have a mod resistance set? Maybe it is set inaccurately high. That can cause a cooler vape.
injen

Junior Member
Registered:
Posts: 21
Reply with quote  #9 
No , its set at 0.003
What ni200 do you people use ? Is it possible that the ud wire has lower resistance per meter than the wire the mod is calibrated?
The sx mini is calibrated with temco wire and the closest i found is the ni200 from stealth vape which has lower resistance than ud wire, despite the lower resistance the sx mini plays perfect.
Just to let you know that before kayfun 5 i had the kayfun 4 which due to the resistance the spring at the base had the VT was playing fine because the total resistance was more than the actual one . Now with the V5 which has solid connections to the base , so the resistance is only the resistance of the coil, i have the problem i described.
I really want to find out what is happening and sell the sx mini and buy a lost vape triade dna 200 because dna chipset is far superior from yihi in temperature control , i cant fell and taste it.
I forgot to mention that i tried nife30 from stealth vape and i had the same results
JohnnyBigodes

Junior Member
Registered:
Posts: 13
Reply with quote  #10 
I got my Hcigar VT75 Nano today and i am having the same problem, but the problem for me is with SS304.

The Vapor is very weak and i have to go up to 250C and it is still a weak unsatisfying vape.

I have uploaded the SS304 material from Steam Engine and also tried putting the right TCR in. Nothing seems to change.

How do i find out the correct mod resistance? Is there a way i could do it for myself?

Thanks in advance
injen

Junior Member
Registered:
Posts: 21
Reply with quote  #11 
I' m sorry to hear that my friend but i tend to believe that is nothing you cant do, it is what it is , i have to live with this and use my sx mini in temperature control because dna 75 chipset refuses to work with my atomizer and builds.
I wish i was able to provide you with a solution but as far as i can see noone can.
JohnnyBigodes

Junior Member
Registered:
Posts: 13
Reply with quote  #12 
Really? There is nothing we can do??

I even tried to set the mod resistance to 0.006, but it still dont work.

I will try other mods and wire tonight.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #13 
Quote:
Originally Posted by JohnnyBigodes
Really? There is nothing we can do??

I even tried to set the mod resistance to 0.006, but it still dont work.

I will try other mods and wire tonight.


You might try other Atty's also.... Maybe atty, coil build, poor grounding in the device, or connectivity issue....??

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

injen

Junior Member
Registered:
Posts: 21
Reply with quote  #14 
Really, i tried everything , cant help you ,it just doesnt play
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #15 
You can experiment with creating material profiles from a TRC, just increase the TCR until you get the vape you expect at the temp you expect.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.