Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Kettle

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
Hi,

Does anyone know the diameter of the Hcigar VT250 510 plate? I've put in a pre-order but if I can't cleanly fit 25mm atomizers then I'm barking up the wrong tree. Nothing on the Hcigar website so any information would be appreciated. Cheers

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
wow there really is a VT250, very nice looking. judging by the fact it takes three 18650's and by looking at the photos, i'd say the top of the 510 is at least 24 if not 25mm or larger.
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
kristian jose

Avatar / Picture

Junior Member
Registered:
Posts: 5
Reply with quote  #3 
iv just got mine today and it fits 30mm attys
__________________
UK VAPERS.
xROCKYx

Junior Member
Registered:
Posts: 2
Reply with quote  #4 
as the 510 is a little conical top plate is slightly more than 25mm, 26mm will fit without noticeable overhang, then come the conus which is approximately 2mm of hight and has a diameter of 30mm so for all bigger 26mm you will have a gap of about 2mm between the box and your atty, but even a 40mm like mason will fit with a rather small overhang on the box itself maximum without overhang would be approximately 36mm.
Kettle

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
Thanks everyone for your responses. I received mine a little while ago and it easily takes my favourite atomizer, which is 25mm, so I'm pleased about that.

How are people finding their VT250? The Mod Resistance on mine wasn't set by Hcigar and so it came out at 0. Does anyone have a gadget to short it and get an accurate Mod Resistance? Also, there was a slight - less than 1mm - movement on my battery cover which I had to fix because it was irritating every time I picked it up.

I applyed the latest SP immediately and, all up, I'm very pleased with the board, as I expected, and the mod more generally.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #6 
Here is a link to a calibration tool to set your mod resistance....http://smokefreemods.webs.com/apps/webstore/products/show/6619269
Adri

Junior Member
Registered:
Posts: 3
Reply with quote  #7 
And don't forget to tell the forum what you measured....[smile]
jarred.sayles

Member
Registered:
Posts: 50
Reply with quote  #8 
I bought that tool awhile back, when I got my Lavabox. It went out on me, so I ordered me 6 LG hg2s and the HCigar VT 250 and got them both in today. Soon as I get my batteries charged, I'll check my mod resistance and post it!
__________________
Vaping is the FUTURE!!!
Mustafa

Junior Member
Registered:
Posts: 10
Reply with quote  #9 

Can any one help me to set up the battery profile please

 

Im using VT250 with 3 AWT 3000mah RED batteries but batteries dont seems to last for 2 days 

Im vaping at 60watt 

xROCKYx

Junior Member
Registered:
Posts: 2
Reply with quote  #10 
assuming the awt would really have 3000mah which I doubt they really have, vaping at 60w with approximately 4sec per puff you will reach about 500 puffs on a full charge under ideal conditions so probably realistic 400 something which depending on your vaping habits would be nothing unusual for some vapers having to charge batteries at least twice a day [wink]
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #11 
The battery profile is not going to help you to get better battery life...it will only help the battery indicator estimation on your device to be a bit more accurate
Mustafa

Junior Member
Registered:
Posts: 10
Reply with quote  #12 

CAN U give a profile for the better battery settings

Im using HCIGAR VT250 with 3 AWT RED BATTERIES

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #13 
Quote:
Originally Posted by Mustafa

CAN U give a profile for the better battery settings

Im using HCIGAR VT250 with 3 AWT RED BATTERIES



Can you post a screen shot of the 'Mod' tab in Escribe?
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.