Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
Dubbzz

Avatar / Picture

Junior Member
Registered:
Posts: 7
Reply with quote  #16 
Quote:
Originally Posted by Ghostrider
I bought a vt200 battery to replace a knackered lipo in a lavabox, i had pretty similar results mine analysed at 11.23Wh.


did you get the vt200 to fit into your lavabox?? if so is it worth upgrading to it??
Ghostrider

Member
Registered:
Posts: 32
Reply with quote  #17 
Quote:
Originally Posted by Dubbzz


did you get the vt200 to fit into your lavabox?? if so is it worth upgrading to it??


It fits ok without any messing. You just push it down towards the wiring and it just clips under the edge of the 510 housing.

As to whether it is worth it or not that's debatable given that it is not a true 1300mAh i only did it because the original was goosed and it was a straightforward replacement.

scott6058

Avatar / Picture

Junior Member
Registered:
Posts: 14
Reply with quote  #18 
Anybody know the true dimensions of this Lipo?
Thanks in advance 
Scott
fibercarbon

Member
Registered:
Posts: 50
Reply with quote  #19 
so what are the proper Escribe settings for this and where do i enter them i need help urgently i cant use my mod it wont charge at all? 
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #20 
You only need battery type set to Lipo 3 cell, the other settings are just to give the battery gauge better info to estimate the reaming %.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
fibercarbon

Member
Registered:
Posts: 50
Reply with quote  #21 
You only need battery type set to Lipo 3 cell, the other settings are just to give the battery gauge better info to estimate the reaming %.

Where do I find this setting ??? currently it wont charge at all ..
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #22 
Quote:
Originally Posted by fibercarbon
You only need battery type set to Lipo 3 cell, the other settings are just to give the battery gauge better info to estimate the reaming %.

Where do I find this setting ??? currently it wont charge at all ..

I replied about charging in another thread.  To get to the battery settings you need to go to EScribe - Options - User Interface and choose Advanced or Manufacture to enable the Mod tab.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.