Evolv DNA Forum
Register Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
ivansn

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
Accidentally I changed battery setting from Lithium polymer to Power Supply mode. But when I try to change back to lithium polymer setting with general battery settings (11.1 Wh, 2-cell, 3.09V cutoff) then upload settings, still cannot charge and display battery check everytime I press firing button.

Try downgrading to SP3 or SP5a firmware still do not work.

What should I do?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
What does eScribe show for cells 1 & 2 voltage?
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
ivansn

Junior Member
Registered:
Posts: 4
Reply with quote  #3 
Quote:
Originally Posted by dwcraig1
What does eScribe show for cells 1 & 2 voltage?


vt167-1.jpg 
Cell 1 : 1.17V
Cell 2 : 4.61V

Switch battery position or using other full charged battery type/brand (vtc4/vtc5/samsung 25r/lg hg2) is also the same results.



dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #4 
Sorry to tell you but the board is the problem.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
ivansn

Junior Member
Registered:
Posts: 4
Reply with quote  #5 
Quote:
Originally Posted by dwcraig1
Sorry to tell you but the board is the problem.


[bawl][bawl][bawl]
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #6 
Same thing happened to my VT133, Evolv had me send in the board and they sent me a new one. They were going to let me send the whole mod but I just sent the board.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
ivansn

Junior Member
Registered:
Posts: 4
Reply with quote  #7 
how can I send to Evolv? Open ticket first or how?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #8 
https://helpdesk.evolvapor.com/index.php?a=add&category=1
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
chai911

Junior Member
Registered:
Posts: 8
Reply with quote  #9 
Battery management IC had gone. I fixed this problem many boxes already.
ming

Junior Member
Registered:
Posts: 4
Reply with quote  #10 
Quote:
Originally Posted by chai911
Battery management IC had gone. I fixed this problem many boxes already.


I just have this problem today, can you please tell me how to fix it, thanks
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #11 
Quote:
Originally Posted by ming


I just have this problem today, can you please tell me how to fix it, thanks


Can you post a screen shot of the 'Mod' tab in Escribe & one of the 'Device Monitor' too...
ming

Junior Member
Registered:
Posts: 4
Reply with quote  #12 
hcigarvt167-1.png  hcigarvt167-2.jpg  hcigarvt167-3.jpg 
ming

Junior Member
Registered:
Posts: 4
Reply with quote  #13 
I switch the place of two batteries and it display the same thing. And both batteries work in my other mod (evic vtwo mini) 
I use LG HG2
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #14 
All your settings look ok but seeing the 4.91v on cell #2 is a good indication that there is a problem with the device...if it is still in warranty, you might contact the vendor you bought it from or email Hcigar at...service@hcigar.com" rel="nofollow">service@hcigar.com
ming

Junior Member
Registered:
Posts: 4
Reply with quote  #15 
thank you, I did send them an email.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.