Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Rustdust

Junior Member
Registered:
Posts: 3
Reply with quote  #1 

OK so I think I have made a really nice TFR/CSV file for the Crown SS Coils, everything else I have used or made has been to week or just hasn't really worked the way I felt it should on my DNA200 and I know its been an issue for many people. 

Try this in Steam Engine to create the csv file and let me what you think.

24 gauge - SS 304 - parallel - 8 wraps and a inner coil dimension of 6 mm, I left the wrap spacing at 0.5 and the leg length at 5mm.

I'm running this at around 260 degrees C with 60 watts 

cheers

Rustdust



Edit: I forgot to mention that this was based on a 0.5 ohm crown coil that I dismantled and it would be reasonable to assume that the 0.25 ohm coil would be less wraps.    

TobyWong7

Junior Member
Registered:
Posts: 2
Reply with quote  #2 
The wraps, diameter, and dual coil don't matter. The TFR/CSV is going to be the exact same using 304 stainless no matter what the guage is or how the coils are made as long as 304 stainless is the only material used
Rustdust

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
OK well I'm certainly no expert but what a difference its made 
Michael Hancock

Avatar / Picture

Member
Registered:
Posts: 48
Reply with quote  #4 
What does your graph look like with this in the analyzer? I've yet to see a nice clean straight temp line on SS. They always look like the Rockies.

Post a screen shot if you can.

__________________
Michael Ray
Rustdust

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
IMG_0109.JPG 
Michael Hancock

Avatar / Picture

Member
Registered:
Posts: 48
Reply with quote  #6 
Unfortunately yours is all over the place as well. SS is tough to get stable and the crown coils are much harder because of the Ni legs it has.
__________________
Michael Ray
NickyGiaccone

Avatar / Picture

Member
Registered:
Posts: 40
Reply with quote  #7 
I'm using the Uwell Crown Subohm tank with the .5ohm SS 316 w/Optional TC or Wattage mode compatibility. I heard pops from the tank like dry hits, then I must've burned the coil a little bit as well because of the taste and smell produced. The mod is fine, though. I need help with this since I know how to use the software except these Crown stainless steel coils with the nickel legs are a puzzle I don't enjoy tonight. Anybody know how to set up a .5ohm SS 316 Wattage Mode vaping (Kanthal style)? I appreciate your help.
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #8 
You don't need to do anything special for any coils in wattage mode, just turn of temp limiting.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.