Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Parks23qq

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
My battery was completely shot on my mod (dna200 tugboat mod) so I ordered a new battery. I soldered it the 1st time to the board, black wire to the B- and red to the B+. So before putting it back together I hit the power button and it turned on and everything was fine so I was about to put it back together until I realized my solders weren't the best. So I reconnected the 2 wires and now there is NOTHING. Battery still has power but nothing is lighting up. I think I may have fried it as the red wire had solder pushed over onto the fuse connection but doesn't that go to the battery anyway? Anyways if it is fried is there any coming back from this? Or is it time for a new mod or even a new board if possible and cheap enough..
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
Try here: https://helpdesk.evolvapor.com/index.php?a=add&category=1
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Parks23qq

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
what is the purpose of that?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #4 
I would think that you will be asked to send them your bad board and they send you a new one.....that's usually what happens. They're pretty good that way.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Parks23qq

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
Really..? That sounds awesome! Hopefully they do that I'll keep my fingers crossed. Thanks so much!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.