Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 3      Prev   1   2   3
Havensal

Member
Registered:
Posts: 44
Reply with quote  #31 
Just happened to me.  Vaping along fine for an hour or so.  Went to take a hit and nothing.  Blank screen.  While I was reaching for a cable to plug into Escribe the error message popped up.  I've had the blank screen issue a couple times over the last month or so.  I usually remove the battery due to scares of previous board failures.  Any answer yet?
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #32 
what type of mod @Havensal? i'm curious. 
__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Tread

Junior Member
Registered:
Posts: 4
Reply with quote  #33 
Any more info on this error message? Just happened to me twice on a 250 board. Once after unplugging from usb wall charger and again 10 min later after uploading settings to device plugged into computer running escribe. Running 1.2 SP3 updated to that the day after I built the mod on 8/27/16. Using kanthal coil in power control mode.

Attached Images
jpeg image.jpeg (1.69 MB, 19 views)
jpeg image.jpeg (3.33 MB, 20 views)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #34 
Quote:
Originally Posted by Tread
Any more info on this error message? Just happened to me twice on a 250 board. Once after unplugging from usb wall charger and again 10 min later after uploading settings to device plugged into computer running escribe. Running 1.2 SP3 updated to that the day after I built the mod on 8/27/16. Using kanthal coil in power control mode.
there's this post from James....

https://evolvapor.forumchitchat.com/post/show_single_post?pid=1288411467&postcount=10&forum=454155

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Tread

Junior Member
Registered:
Posts: 4
Reply with quote  #35 
Thanks for the fast response chunky, I'm still pretty new to the 200/250 and escribe, what does he mean by special settings? Settings on the profile I am currently using while the error is happening? UPDATE ON POST: Added pic with "My DNA" info in top left

Attached Images
jpeg image.jpeg (2.77 MB, 13 views)
jpeg image.jpg (3.73 MB, 13 views)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #36 
Quote:
Originally Posted by Tread
Thanks for the fast response chunky, I'm still pretty new to the 200/250 and escribe, what does he mean by special settings? Settings on the profile I am currently using while the error is happening? UPDATE ON POST: Added pic with "My DNA" info in top left
not exactly sure tread. this wasn't a common problem with 200/250 boards. information is limited on this topic in this forum. if you really want to find out i would open a help ticket with evolv.

https://helpdesk.evolvapor.com/index.php?a=add

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #37 
I got it once 10 or 11 months ago in a 200, I can't remember the circumstances now, but I cleared it easily and it never returned.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Tread

Junior Member
Registered:
Posts: 4
Reply with quote  #38 
I appreciate the feedback, I got the error a total of 5 times in 24 hours since the first error but have not gotten it since. Did a soft reboot after charging to 100% and that seemed to have solved it? Not totally sure but it's gone for now.
Majiksmoke

Junior Member
Registered:
Posts: 3
Reply with quote  #39 
Recently started experiencing this issue on my every day carry DNA250 device. It happens randomly. Some of the time the battery charge is in the 70's range...some of the time it occurs when the battery percentage is as low as 40 percent. The only constant seems to be that it happens when the mod has been sitting for 45 minutes or more (which doesn't happen often during the day). 

So far I've checked my battery options in escribe for the turnigy 1300mAh pack I use (all correct at Lithium polymer, 14.43 Wh,, 3 cell, soft cutoff at 3.09v, and mazimize puffs) 

The only odd thing I do see in that tab is the Max Peak Input current is set to 28A, and the Max Sustained Input Current is set to 28A. I've never changed those values. 28 Amps seems completely unrealistic to me....should that be 2.8 Amps, or am I barking up the wrong tree?

Currently the mod and escribe are at Version 1.2 SP5.2

I just did a couple of soft reboots, a hard reboot, reloaded my most recent .ecig file, and removed the 3s pack and waited for a minute before re-terminating it. 

All seems good now, but only time will tell. What have the rest of you found that cured this issue?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #40 
For the DNA250 the default (and maximum) is 28 amps for both battery input settings.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Majiksmoke

Junior Member
Registered:
Posts: 3
Reply with quote  #41 
Well, it seems like all of the options are correct then...and I'm back at square one. I'm going to try what Tread said and see if that fixes it.

If that is unsuccessful I'll try a few firmware downgrades and upgrades to see if any of the older firmare builds clear up the issue. 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.