Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 3      Prev   1   2   3   Next
iandvaypes

Member
Registered:
Posts: 37
Reply with quote  #16 
Quote:
Originally Posted by James
Oh, I mean your EScribe settings.
iandvapyes: This happened to you before 8/21 then? How long have you been encountering it?

Still on the 7/29 r1. It just started it this morning
mechaet

Junior Member
Registered:
Posts: 5
Reply with quote  #17 
Just had it happen again.

http://puu.sh/jR3X5/88c35bedc6.png

http://puu.sh/jR3YQ/03edd53f48.png

scoopy

Avatar / Picture

Member
Registered:
Posts: 310
Reply with quote  #18 
Iandvaypes. ...try the 8-21 firmware and see if it still does it.....not sayin it will fix it but it's worth a shot
__________________
[wave]
James

Avatar / Picture

Administrator
Registered:
Posts: 304
Reply with quote  #19 
mechaet could you save and post your settings file? I don't see anything unusual on those screens.
mechaet

Junior Member
Registered:
Posts: 5
Reply with quote  #20 

Sure thing. Also:

http://puu.sh/jRc6j/bc84c985c1.png

Settings file: 
https://onedrive.live.com/redir?resid=2133226AD7D65E28!2800&authkey=!AE_sNd5dL0jAWJ0&ithint=file%2cecig

mechaet

Junior Member
Registered:
Posts: 5
Reply with quote  #21 
I think I might have narrowed it down to not being able to save it as 22.2Wh, it drops the decimal (wtf) and puts it at 22Wh which then allows it to charge to only 12.0V instead of 12.6, and at some point the chip figures out what the voltage is and drops the battery percentage accordingly and reboots(? not sure of sequence), coming back up with a lower battery percentage after showing the error screen.
Always_Jonezen

Member
Registered:
Posts: 46
Reply with quote  #22 
I am having the same problem. Same error every time I upload or download settings from escribe. I'm using software dated 8/7

Attached Images
jpeg 1442004311946-1231449826.jpg (3.54 MB, 39 views)

xevape

Administrator
Registered:
Posts: 95
Reply with quote  #23 
I just got this today.   Upon uploading settings I get Error press Up to continue.

With firmware 8-21 & 8-7

Untitled.png 

With firmware 7-29

Untitled.png 


Weird...does not happen with 2015-07-29.sw-update only firmware after that date.


__________________

Website -  http://www.xevape.com
Instagram  -  http://www.instagram.com/xevape
Oldwebsite - http://www.thexboxexpert.com
Previouslife - http://www.xbox-scene.com

Always_Jonezen

Member
Registered:
Posts: 46
Reply with quote  #24 
I pulled the battery out completely disconnected and reinstalled it and I haven't seen that error in 48hrs
dairylandservice

Junior Member
Registered:
Posts: 6
Reply with quote  #25 
Quote:
Originally Posted by James
Has this happened to anyone who is not on 8/21?

The battery meter has changed because that message indicates it accidentally restarted without savings its settings. Most likely it indicates a firmware bug.
Do you have any special settings presently? If so, could you attach them please?
I'm getting the same "Error Press Up to Continue" and same 77% battery meter reading on fully charged batteries in 3 of my 4 Reuleauxs.

I am running firmware 2015-9-30 on all 4 and Escribe Revision 1.0.35.2.

The problem is very intermittent and I have not seen this at all on either of my VT 200s.
mechaet

Junior Member
Registered:
Posts: 5
Reply with quote  #26 
Running 9/30 on my Litt, still seeing this issue as well intermittently.

Have not yet seen it on my DogMods, which runs the same firmware and profiles.
n7vdr

Junior Member
Registered:
Posts: 2
Reply with quote  #27 
just got my reuleaux last night and got the same error message when writing to the device. the program date was 11/6 so i assume its the latest firmware. my lavabox updated firmware when i ran escribe the first and never seen the error message on that device. i did a hard reboot on my reuleaux and have not seen it again. im only 12 hrs into it tho so time will tell.
dairylandservice

Junior Member
Registered:
Posts: 6
Reply with quote  #28 
Quote:
Originally Posted by dairylandservice
Quote:
Originally Posted by James
Has this happened to anyone who is not on 8/21?

The battery meter has changed because that message indicates it accidentally restarted without savings its settings. Most likely it indicates a firmware bug.
Do you have any special settings presently? If so, could you attach them please?
I'm getting the same "Error Press Up to Continue" and same 77% battery meter reading on fully charged batteries in 3 of my 4 Reuleauxs.

I am running firmware 2015-9-30 on all 4 and Escribe Revision 1.0.35.2.

The problem is very intermittent and I have not seen this at all on either of my VT 200s.
On my 4th and newest Reuleaux, the very first thing I saw on the screen (after taking it out of the packaging and installing 3 VTC5's) was "ERROR Press up to continue".  I had to press up and then I saw welcome screen for the very first time.  This was prior to changing anything from default or even screwing on an atty.
TBCAmor

Junior Member
Registered:
Posts: 3
Reply with quote  #29 
Just got this last night. I charged my VTC4's, brand new with the Reulaeux I got almost two weeks ago. On my Blu6, metered them at 4.2. Put them in the Reuleaux, battery percent and bar showed 84%. I have my charge fields set on this DNA 200 to display cell voltage. All were accurately reading 4.2, and it stopped charging internally. Watt hours were 18 something, in the device monitor, and I'm using a battery profile from here that the Reuleaux tested VTC4's at 21.44. That was still correct.

I tried swapping to another set of batteries, same thing, married set all read 4.2 in the device and escribe, but 84%. Was late so I just pulled the batteries and went to bed. Same crap this morning.

Then I put the batteries in rotated again, and got no screen, then error press up to continue. It booted all was fine, but 84% still. I ended up going into device monitor and changed my watt hours manually to 21.44, my pack was at 12.6, cells at 4.2. And uploaded, so far all is fine. I was gonna hard reboot, but I had batteries in, and it didn't seem to want to do it.

I'm gonna keep monitoring the cells. I set the charge display on this guy to show the cells so I could make sure all were staying balanced without escribe. Also, I should say that live monitoring, even prior to the fix, all my batteries sagged evenly dead on. .35 atty, kanthal, authentic vector, 63 watts. Everything but the watt hours, only in live monitoring was perfect.

So, I reset the watt hours when fully charged in device monitor. I've pulled and rotated the batteries since, we are good so far. After having to fix the screen ribbon a good week ago, now this, I'm concerned about this device. My Tugboat DNA 200 is over a month old, and it's been perfect. Hope this maybe helps someone.
NutzSlappinYaChin

Avatar / Picture

Junior Member
Registered:
Posts: 6
Reply with quote  #30 
Just got this message this morning while going out the door for work. I did a battery swap (LG HE4's), was opening the door to leave, fired it up, nothing. Looked at the screen to see the error. Hadn't seen this yet on my 2-Week old Reuleaux until this morning. I pressed the up and everything looked normal. I was running power mode at 50W
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.