Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Lethal Dose

Avatar / Picture

Junior Member
Registered:
Posts: 6
Reply with quote  #1 
So I just bought an Efusion Duo and I am trying to unscrew the battery sled but one of the two screws won't come out no matter how hard I try. I have used all the screwdrivers I have available but if I try any harder I'll damage the screw (I fear I may have already damaged it a little). Any ideas?
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
I ran across this on another forum, it may be of some help.
https://www.e-cigarette-forum.com/forum/threads/evolv-ing-thread.736118/page-65#post-17941871
#1281

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Lethal Dose

Avatar / Picture

Junior Member
Registered:
Posts: 6
Reply with quote  #3 
Thx. I did some research online as well and I think I'll try this if I can find that stuff or I'm gonna try the superglue trick...
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #4 
Also a flat rubber band between the screw and driver.

Not sure how tough the mod is never seen one up close, but a sharp tap on the end of the screw driver with a small hammer (tap not whack) can bot help to free the thread and get the driver tip better seated, but at you own risk.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Lethal Dose

Avatar / Picture

Junior Member
Registered:
Posts: 6
Reply with quote  #5 
I managed to get it out with a flat screwdriver which I filed a bit at the edges. Man it was a PITA! Thanks guys.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #6 
Quote:
Originally Posted by Lethal Dose
I managed to get it out with a flat screwdriver which I filed a bit at the edges. Man it was a PITA! Thanks guys.
Great news

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.