Registered: 1482249317 Posts: 1
Reply with quote #1
I received a Therion 75 and when I try to do a battery test under Escribe with a coil of 1 ohm with 24Ga kanthal at a power of 40 watt I have this message "Ohm to high" Is it normal? Should I make a lowercoil ? Trying the test with less Watt? I found this info for a dna 200 but I'm not sure if this is the same for a DNA75 I found various CSV for my battery ( SAMSUNG ) but most of time there is one or 3 battery INR 18650-25R in the box. Did it change something. I have 2 battery in my Therion Thanks for your answer.
Registered: 1435398945 Posts: 2,449
Reply with quote #2
You need a resistance less then or equal to 0.5 ohm to get full power, for 40 W you should be able to use 0.9 ohm. It is the output voltage limit of 6.2 V that determines the max res at any power setting, there is a graph in the specsheet or you can calculate by (6.2 * 6.2)/power.
__________________ • I am not employed by nor do I represent Evolv Inc. All opinions are my own, they are just opinion not fact and can be wrong • Latest versions of EScribe: DNA 200/250 • DNA 75 Common problems