mikode
Junior Member
Registered:1475130086 Posts: 6
Posted 1475321565
· Edited
Reply with quote
#1
Hello together! I have a problem! I assambled an SS316L @ 0,16 Ohm and selected temperature mode. But when I´m firing temperature mode writes OFF? Because of wich issue???
ChunkyButt200
Administrator
Registered:1437592337 Posts: 1,516
Posted 1475337202
· Edited
Reply with quote
#2
hi mikode.... if the dna does not sense a rise in resistance, while firing, within a set amount of time (1 second) it will kick you out of temp control. make sure you have 316L selected as the coil material in the mod. make sure your connections are secure (atomizer, coil wires, spaced coils). what brand of SS316L? what atomizer? "mod resistance" set correctly? post a screenshot of device monitor while firing the atomizer in temp mode (SS316L). make sure these boxes are selected
__________________ 1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?• I am not employed by nor do I represent Evolv Inc. All opinions are my own, they are just opinion not fact and can be wrong •
mikode
Junior Member
Registered:1475130086 Posts: 6
awsum140
Senior Member
Registered:1435408181 Posts: 203
Posted 1475342034
· Edited
Reply with quote
#4
I don't want to tell you what settings to use, but will offer that I am using 316L in a DNA200 at a power of 40 watts and temperature set at 520F, ~270C, in a dual coil Aromamizer, say 20 watts per coil. It is possible that you are not applying enough power for the DNA to see a change in resistance. What Chunky was looking for was the graph generated in device monitor as the device is fired. That will show the live resistance of your coil as it heats. I would also suggest trying various powers and temperatures to see what gives you the vape that you like.
mikode
Junior Member
Registered:1475130086 Posts: 6
Posted 1475342518
Reply with quote
#5
Now I set the Watts to the Max possible with this setup 40 Whatts DualCoil 316L 0,16.... but no change.....
awsum140
Senior Member
Registered:1435408181 Posts: 203
Posted 1475345983
Reply with quote
#6
Can you post a screen shot of the graphs in device monitor? That would be a big help. Have you tried changing temperature as well as power?
mikode
Junior Member
Registered:1475130086 Posts: 6
Posted 1475347420
· Edited
Reply with quote
#7
I changed everything on both Therion and Box75 in the first second temp will be displayed and then there is written off as in the earlier post... but Temperature is just a questionmark in evolv software....
Attached Images
1.jpg
(185.52 KB, 44 views)
2.jpg
(195.25 KB, 40 views)
awsum140
Senior Member
Registered:1435408181 Posts: 203
Posted 1475348462
Reply with quote
#8
Well, looking at the graph, on the right, it's showing cold ohms and firing ohms at the same resistance. Are you sure the wire is SS 316L? Who is the source of the wire? What atomizer is this happening with?
mikode
Junior Member
Registered:1475130086 Posts: 6
Posted 1475357333
Reply with quote
#9
I´m shure thats 316L from UD an it´s made on the 22 Griffin
yoseff
Member
Registered:1448606054 Posts: 87
Posted 1475357733
Reply with quote
#10
Make sure also that you have the correct ss316L csv. My therion was with incorrect profiles. Said 316L but was just in name. To be sure try this ones i put here. One is a profile (jaquithv7 - I use this one with ss316L), and other is the csv from steamengine.
Let us know if it solved
Attached Files
ss316ljaquithv7.ecigprofile
(497 Bytes, 53 views)
DNA200-SS_316L__Elite-SteamEngine.csv
(129 Bytes, 30 views)
__________________
yoseff
Member
Registered:1448606054 Posts: 87
Posted 1475357829
Reply with quote
#11
If it is from UD, you can try also this one
Attached Files
UD-SS_316L_DJaquith_V4.csv
(124 Bytes, 72 views)
__________________
mikode
Junior Member
Registered:1475130086 Posts: 6
Posted 1475360824
Reply with quote
#12
BIIIIIG UP Yoseff!!! Thank you! The UD csv was the solution!!! Pls tell me where can I find more of this csv´s?
awsum140
Senior Member
Registered:1435408181 Posts: 203
Posted 1475361532
Reply with quote
#13
Glad you got a solution, mikode. Yoseff to the rescue!
yoseff
Member
Registered:1448606054 Posts: 87
Posted 1475361688
· Edited
Reply with quote
#14
Glad it solved the issue About the csv's, you can get pretty much any material from steamengine . About that UD csv, i got here in the forum, dont remember the thread. It is from Jaquith. He developed great csv's for SS When i test a csv that works, i usually keep it and later share with people here in the forum who may have problems like yours.
__________________
Conny
Junior Member
Registered:1477259180 Posts: 5
Posted 1478026299
Reply with quote
#15
I have the same problem with mikode. I try everything is wrote in this topic and....... NOTHING. Is there a problem on my DNA 75 board? Can someone give me a help please. I love my Therion but if I can't use it on temperature control I maybe send it to the garbage