Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
Brandon

Avatar / Picture

Administrator
Registered:
Posts: 125
Reply with quote  #1 

Evolv is proud to announce our new DNA 60 board. It is a DNA 40 sized board with the added functionality of EScribe. The boards are available now in extremely limited quantities to enable our customers to have products on the market before the FDA August 8th deadline. Because of component lead times, volume availability is not expected until October of 2016. As a result customers will be limited to 1 board per device that they plan to release plus one board as a spare.

Attached is a solid model of the board. It is largely the same dimensions as the DNA 40 with the following exceptions.

-The inductor on the back of the board is 4mm high like the DNA 20 & 30 not 3.5mm like the DNA 40.

-The fire button is the green fire button from the DNA 75 & 200 not the 3.1mm tall button from the DNA 40.

-The adjust buttons are new, taller and clickier than the previous buttons but still waterproof.

- The board has 5 through holes on the bottom for data and charger. Our 1 amp charger has been updated to include USB data pins.

Individual quantity pricing is as follows:

$59.99 with charger
$49.99 without charger

 
Attached Files
zip DNA_60.zip (1.96 MB, 86 views)
pdf DNA60.pdf (766.53 KB, 155 views)

angsty

Junior Member
Registered:
Posts: 1
Reply with quote  #2 
Quote:
Originally Posted by Brandon
Evolv is proud to announce our new DNA 60 board. It is a DNA 40 sized board with the added functionality of EScribe.


hell yeah!
mastblast09

Junior Member
Registered:
Posts: 1
Reply with quote  #3 
Heck yesssss!
KSlice

Junior Member
Registered:
Posts: 1
Reply with quote  #4 
The excitement!
lordbyron77

Junior Member
Registered:
Posts: 15
Reply with quote  #5 
WOWOWOWOWOWOWOW!
Willy

Avatar / Picture

Member
Registered:
Posts: 63
Reply with quote  #6 
Nice! 
Tpat591

Junior Member
Registered:
Posts: 29
Reply with quote  #7 
Awsome.  The long awaited small format Escribe compatible DNA board becomes a reality!  Yeah!
TheMadKracker

Junior Member
Registered:
Posts: 5
Reply with quote  #8 
No mounting rails?

Tpat591

Junior Member
Registered:
Posts: 29
Reply with quote  #9 
Quote:
Originally Posted by TheMadKracker
No mounting rails?


Did seem odd no mounting scheme was evident in drawings or 3d files that I saw.
engmia

Junior Member
Registered:
Posts: 18
Reply with quote  #10 
Aww yiss, that's awesome! Awesome work Evolv! I hope you plan to expand production.

What does no mounting rails mean, I am just about to build my first DNA75 box mod. Is it as easy to build as the DNA75?
BranTuck84

Junior Member
Registered:
Posts: 4
Reply with quote  #11 
Will the DNA 60 be able to run without a USB. Like if we don't care about using escribe or charging.
Willy

Avatar / Picture

Member
Registered:
Posts: 63
Reply with quote  #12 
Another question, will the small screen be detachable?
turbocad6

Senior Member
Registered:
Posts: 153
Reply with quote  #13 
the dna60 will work fine without the usb, you could also temporarily connect it to upload and program it, then leave it stand alone. I think the small screens will be soldered on, the connector pitch is wrong for the zif sockets used in the detachable screens
greenj22

Junior Member
Registered:
Posts: 26
Reply with quote  #14 
Quote:
Originally Posted by Brandon

Evolv is proud to announce our new DNA 60 board. It is a DNA 40 sized board with the added functionality of EScribe. The boards are available now in extremely limited quantities to enable our customers to have products on the market before the FDA August 8th deadline. Because of component lead times, volume availability is not expected until October of 2016. As a result customers will be limited to 1 board per device that they plan to release plus one board as a spare.

Attached is a solid model of the board. It is largely the same dimensions as the DNA 40 with the following exceptions.

-The inductor on the back of the board is 4mm high like the DNA 20 & 30 not 3.5mm like the DNA 40.

-The fire button is the green fire button from the DNA 75 & 200 not the 3.1mm tall button from the DNA 40.

-The adjust buttons are new, taller and clickier than the previous buttons but still waterproof.

- The board has 5 through holes on the bottom for data and charger. Our 1 amp charger has been updated to include USB data pins.

Individual quantity pricing is as follows:

$59.99 with charger
$49.99 without charger



I have a 60 up and running, and for some reason the vape just isn't the same as a 40, or even 75/200.  It's pulling the exact same voltage/amps, at 22 watts (so wiring isn't the issue), with the same tank/battery swapped over as well.  Is there some reason as to why the 60 just isn't quite as "smooth" as a 40?  Again, same tank/coil, battery, etc. The flavor isn't as good either!
greenj22

Junior Member
Registered:
Posts: 26
Reply with quote  #15 
Quote:
Originally Posted by turbocad6
the dna60 will work fine without the usb, you could also temporarily connect it to upload and program it, then leave it stand alone. I think the small screens will be soldered on, the connector pitch is wrong for the zif sockets used in the detachable screens

I've even considered having a 4s balance lead wired up to the 60 for the USB, given the mod is easily accessible.  Then wiring a male 4S tap to the USB.  You could then get away without having to mount/cutout the USB in a mod, yet be able to have the USB/tap to quickly plug into the female tap wired to the board for escribe.  This is a last resort/another option if you for your application the USB won't fit or you don't want to mount it.  Keep in mind then you'd have the USB w/ tap to look after (not lose).  
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.