Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Slangstr8

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
Is it possible to wire a dna250 board to 3 18650's in series to get full power? (250w) instead of using a 3s lipo. also is it possible to wire it to a power supply instead of batteries? How would the balance leads be wired so that it will trick it to fire?
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
Yes and Yes, for PSU just choose PSU as the battery type, you can also use resistors to fake a battery and there is at least one thread with details here somewhere for over a year ago, it will be about a 200 but apart from a bit more current it's the same for this.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Slangstr8

Junior Member
Registered:
Posts: 4
Reply with quote  #3 
I want to wire the dna 250 to either 3 18650s in series, or use a 12v 30 amp power supply.
Slangstr8

Junior Member
Registered:
Posts: 4
Reply with quote  #4 
Also on the escribe software I did not see the option for choosing type or amount of batteries for the dna250
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #5 
In eScribe under the option tab change the user interface to something other than "clean"


__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Slangstr8

Junior Member
Registered:
Posts: 4
Reply with quote  #6 
Does "clean' just make it easier to use the software? Limiting options? Because I was surprised how limited my options were.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.