Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
leanneomgz

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
Hi!

So, I got a DNA 200 Reuleaux & when I got it there was no third field displayed, it was just ohms, voltage & then wattage as the main display. 
I've now to the third field coming up now that I've reset it back to factory & I want to have just the two fields back! I've tried everything I can think of

Any suggestions?!
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
My Reuleaux came with temp in the 3rd field, maybe you have temp limiting off either by adjusting the temp above 600 F or in a profile with it turned off.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
leanneomgz

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
When I turn the temp off it just displays as ---F so its still there but inactive. When I turn it to 600F for example, it goes to the same thing. 
But before I reset it there was literally no 3rd field & I'm at a loss as to how it was like that & I want it back [frown] 

Cant quite get my head around EScribe to get it to work 
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #4 
Have you tried to re-install Reuleaux's setup file again.  It is available on their web site:

http://www.wismec.com/product/reuleaux-dna200/


__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

leanneomgz

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
I've just tried to do that but no luck. Just a bit confused as to how I got it without the 3rd default field now I cant seem to find a way to get rid of it? 
smueller

Avatar / Picture

Junior Member
Registered:
Posts: 3
Reply with quote  #6 
I know what happened. Your "third field" was the profile name. Change it back to that and make sure your profile your using doesnt have a profile display name. THe box next to the profile name on the profile page. make sure that is blank and it will go away again as long as the third one is set to profile name.

get it?

so for example on the display page it should be

1. Ohms (or whatever)
2. Voltage (or whatever)
3. Profile Name


Then as stated above on the Profiles page where your 8 profiles are......You have the Actual Profile Name and next to it a box where you can name it for the above display. Just make sure that box is empty for all your profiles and you should be good.

__________________
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.