Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 3      Prev   1   2   3
dropdlicious

Junior Member
Registered:
Posts: 12
Reply with quote  #31 
I find it strange as well haha. But I asked about that and got that answer. Might be my best bet to just get the 133.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #32 
Unless I missed something the DNA200 and the DNA133 are the same board and use the same firmware but the settings are configured a bit different for the battery and balance charging and wiring of the balance connector is a bit different for 2 cell configuration.  Are they not having firmware issues with the DNA133??   Getting more puzzled..... If it were me and I liked the DNA200 VS, and Vapor Shark is still selling new ones, I would have them give me another new one. If it comes and works great then you are done, but if it still is DOA then you are still in the same position you are now in...  just my thoughts.... again good luck...
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

dropdlicious

Junior Member
Registered:
Posts: 12
Reply with quote  #33 
Thanks man! I really do want the dna200 so I may hit them up with "why are you still selling them then?" If they don't want to send me another one. They've been great at getting back with me, but it's just all been a little confusing.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #34 
Vapor Shark has traditionally been pretty good honoring their warranty I think.  Your VS is/was DOA so why would they not replace it under warranty?  And, it may not be a firmware issue but something else causing the DOA....  They won't know for sure until they look at yours....
__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

dropdlicious

Junior Member
Registered:
Posts: 12
Reply with quote  #35 
Yeah, they're gonna go ahead and pick it up. I only kept it because VS said I could wait for a firmware update to fix it but it's been 3 weeks so off it goes haha
norwegianvaper

Junior Member
Registered:
Posts: 14
Reply with quote  #36 
Quote:
Originally Posted by retird



I know my comments don't meet your concerns but....... at the very least SS wire is probably the most "touchy" wire that folks try to use.  The fact that the DNA75 seems to smooth it out a bit shows me that Evolv is going in the right direction in responding to the ever changing wire landscape.  

Have a great day



Hi
It would be very nice if they at least included the pre installed settings like the Triade dna 200 by Lost vape, and The Efusion mods also from Lost Vape. They have settings pre installed like Ti1, NiFe30, different SS like 316L and 304 and more. Of course the Nickel 200 installed to, so you don`t have to hasle with steamengine for each profile.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.