Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 5 of 7     «   Prev   2   3   4   5   6   7   Next
lele_M

Junior Member
Registered:
Posts: 3
Reply with quote  #61 
Quote:
Originally Posted by giz_60
No, you don't have to run the analyzer again, just change the value & upload to device....good to go...[thumb]

I'll do it!
Thx giz_60!
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #62 
[thumb]
xGrimshottx

Junior Member
Registered:
Posts: 1
Reply with quote  #63 
anyone have a csv discharge profile for 2 efest 3000 mah 35 amp batteries that will work on the starss oni 167 watt with dna 250 chip
Wayneo

Senior Member
Registered:
Posts: 296
Reply with quote  #64 
Considering there are no true 3000 mAh 35A 18650's, or ANY Efest batteries on Mooch's approved list, I'd really suggest you run your own battery analyzer for your batteries. Easy to do, and guaranteed accuracy for your mod only.  
__________________
My old tired eyes don't look at skewed, moire filled cell phone photos. Printscreen - Sniping tool or [ALT]+[PRT SCN], open MSPaint and paste [CTRL]+[V]
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #65 
Quote:
Originally Posted by Wayneo
Considering there are no true 3000 mAh 35A 18650's, or ANY Efest batteries on Mooch's approved list, I'd really suggest you run your own battery analyzer for your batteries. Easy to do, and guaranteed accuracy for your mod only.  


Agreed!! With the extensive test that Mooch performs on batteries, for the purpose of vaping, I would not even consider anything not on his recommended list..https://batterybro.com/collections/moochs-recommended

.image1.jpeg 

Madkat

Junior Member
Registered:
Posts: 17
Reply with quote  #66 
Hi

Been tweaking my setup and now I've seen people adjusting their battery capacity Wh in eScribe.

I am on a Triade 250, the default battery capacity is 25.68wh and i am using 3x HG3 3000mh 18650 batteries. 

Is this a good average setting or do i need to set it higher or lower? (is there a calculation? didn't see anything on steam engine)

also i am planning to get spare VTC6 x3, would the 25.68Wh be used with these batteries as well?
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #67 
It is not critical and only helps the battery meter be a bit more accurate, you can run battery analyzer with a dripper deck and large coils (I use 4 parallel loops of 0.5 mm Kanthal 0.5 ohm each in a loop about the size of a tennis ball). Or you can just adjust by adding or subtracting 0.5 - 1 Wh until you get a weak battery message when the gauge shows empty.  The value will vary with batteries and vape style, the power and puff time will cause different amounts of voltage sag.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Ari0107

Junior Member
Registered:
Posts: 2
Reply with quote  #68 
Quote:
Originally Posted by ChunkyButt200
okie dokie,here ya go........... THIS CURVE IS FOR 2 SONY VTC6 18650 CELLS 

THEIR CAPACITY (WATT HOURS) IS - 18.78

I USED A "CELL SOFT CUTOFF" OF - 2.6V.


txt Sony VTC6 Battery Curve.csv    

 you might have to remove the ".txt" extension and leave the "csv" part for it to be usable with the escribe program, i think. 


I can't download it cause i'm new member,
Pm it to me please,
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #69 
Quote:
Originally Posted by Ari0107

I can't download it cause i'm new member, Pm it to me please,


Welcome to the Forum...[wave]   PM sent with file attached...
Ari0107

Junior Member
Registered:
Posts: 2
Reply with quote  #70 
Quote:
Originally Posted by giz_60


Welcome to the Forum...[wave]   PM sent with file attached...


Thanks bro,
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #71 
Quote:
Originally Posted by Ari0107
Thanks bro,
[thumb][thumb]
Andreogon

Junior Member
Registered:
Posts: 10
Reply with quote  #72 
I have battery therion166 LG HG2.
kapacity: 22.2
cel cutoff: 2.8
What is that correct?
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #73 
Capacity...18.75
Andreogon

Junior Member
Registered:
Posts: 10
Reply with quote  #74 
Ok thanks giz_60
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #75 
[thumb]
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.