Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 3      Prev   1   2   3   Next
drycounty

Junior Member
Registered:
Posts: 2
Reply with quote  #16 

Quote:
Originally Posted by shadows
hello
any profile for 1xVTC6 ??

If anyone has this, i'd appreciate it too.

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #17 
csv Sony_VTC6 (1)_18650_3000 mah_10.42 Wh.csv     
drycounty

Junior Member
Registered:
Posts: 2
Reply with quote  #18 

Quote:
Originally Posted by giz_60
csv Sony_VTC6 (1)_18650_3000 mah_10.42 Wh.csv     

Thank you [thumb]

P1234qwer

Junior Member
Registered:
Posts: 1
Reply with quote  #19 
can't download .csv file although registed.
somebody help!(sumsung 30q and awt 18650 3000Mah 40a if anybody had)
thank you.[smile]
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #20 
Quote:
Originally Posted by P1234qwer
can't download .csv file although registed.
somebody help!(sumsung 30q and awt 18650 3000Mah 40a if anybody had)
thank you.[smile]


zip Samsung_30Q (1)_18650_3000 mah_9.97 Wh.zip     

Mustafa

Junior Member
Registered:
Posts: 10
Reply with quote  #21 

Can anyone help me set 3 awt 18650 batteries for HCIGAR DNA 250 

 

My batteries dosents last long like in one day batteries are gone

 

can any one help me giving a battery profile for me 

 

 

giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #22 
Quote:
Originally Posted by Mustafa

Can anyone help me set 3 awt 18650 batteries for HCIGAR DNA 250 

 

My batteries dosents last long like in one day batteries are gone

 

can any one help me giving a battery profile for me 

 

 




See response in your other post....https://evolvapor.forumchitchat.com/post/hcigar-vt250-8341841?trail=15#11
mnader221

Junior Member
Registered:
Posts: 2
Reply with quote  #23 
thank you
mnader221

Junior Member
Registered:
Posts: 2
Reply with quote  #24 
guys why i cant download the file for Sony VTC5A, once i click on the link they told me that i dont have a permission, note that i already got a confirmation message from evolv that they approved me
lucidjh

Junior Member
Registered:
Posts: 1
Reply with quote  #25 
thank you!!!
Mustafa

Junior Member
Registered:
Posts: 10
Reply with quote  #26 
Can ANy one upload a profile for AWT RED 3000 mah batteries
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #27 

I've not used these batteries....

Mooch tested this battery:

https://www.e-cigarette-forum.com/forum/threads/awt-40a-3000mah-18650-bench-retest-results-only-a-20a-battery-damaged-at-over-30a.717124/



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Wayneo

Senior Member
Registered:
Posts: 296
Reply with quote  #28 
@Mustafa After asking this again and again over a 5 week period, you could have run your own Battery Analyzer 4,312 times. I takes .... maybe an hour, tops. It will be accurate for whatever battery they re-wrapped. 
__________________
My old tired eyes don't look at skewed, moire filled cell phone photos. Printscreen - Sniping tool or [ALT]+[PRT SCN], open MSPaint and paste [CTRL]+[V]
Mustafa

Junior Member
Registered:
Posts: 10
Reply with quote  #29 

I have very little knowledge about battery profile setting and Im very sorry for keep disturbing again and again 

If I knew I would have never seek for help 

 

Sorry :-(

Wayneo

Senior Member
Registered:
Posts: 296
Reply with quote  #30 
Mustafa, on your battery tab you'll see Battery analyzer. Start with close to fully charged batteries. Create about a .5 ohm coil. Best to use 4 or so tennis ball sized loops of wire. Start the test, at 40 watts. In less than an hour, the testing will finish. You then need to save and load. Dead easy, and the absolute most accurate values for your mod and your batteries.

Cheers.

__________________
My old tired eyes don't look at skewed, moire filled cell phone photos. Printscreen - Sniping tool or [ALT]+[PRT SCN], open MSPaint and paste [CTRL]+[V]
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.