Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
churd83

Junior Member
Registered:
Posts: 2
Reply with quote  #1 
How do you remove or delete profiles you will not or don't use? Trying to clean up the profile selection menu on my device.

Thanks
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #2 
Currently you can't. There will be always eight profiles. For the unused ones, you can set them for power mode or basic TC vaping.
churd83

Junior Member
Registered:
Posts: 2
Reply with quote  #3 
Well that's lame lol, but thanks for the quick response.
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #4 
Quote:
Originally Posted by churd83
Well that's lame lol, but thanks for the quick response.


Work around.... using EScribe

  1. Go to Materials Tab and click on the “cross” (new material) icon. You now have a wire type naned “unnamed”. Click on “unnamed” and type in “Name” and “on screen name”. (name the new material maybe something like “Empty”). Un-check Temperature Sensing. Now add the new material to the “ Materials on Device” list (click on the arrow to add the new material to the right hand material list).
  2. Go to the General Tab and select a profile you want to change.  Type in the Name and On Screen Name.  Select the Coil Material (the coil material you added in step 1 above).  Now change the Power under Settings to 1 watt.  Upload the profile.
  3. Repeat (or copy) for each profile you are not wanting to use and upload.

You should now have 8 profiles with those not being used shown as “Empty”.


__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

turbocad6

Senior Member
Registered:
Posts: 153
Reply with quote  #5 
you could also just pick 4 profiles and repeat them 1-4 and 5-8, so cycling through profiles it would keep cycling through these 4 profiles as if there were only 4...
ZaiKo

Junior Member
Registered:
Posts: 5
Reply with quote  #6 
+1 For a checkbox what makes the (unused) profiles hidden in the device. [smile] That would be great!
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #7 
Quote:
Originally Posted by turbocad6
you could also just pick 4 profiles and repeat them 1-4 and 5-8, so cycling through profiles it would keep cycling through these 4 profiles as if there were only 4...


You really don't have to scroll thru the profiles. Just use the up and down buttons to move up or down from the current profile.

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.