Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
GreekNick

Junior Member
Registered:
Posts: 5
Reply with quote  #1 
Once you change the TCR on one material it automatic changes it to all other materials  and once you change a battery it puts it back to its default 0.006
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
If you are looking at the value in the box you get from Actions - TCR (Approximation) it always defaults to 0.006 as most profiles cannot be converted to a single TCR. Are the materialsall like this (TCR 0.006)?
tcr0006.png 


__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
GreekNick

Junior Member
Registered:
Posts: 5
Reply with quote  #3 
Yes. and once i connect it again and try to change it it goes again to 0.006 allthow i have set it to 0.0012

Untitled.png 



Untitled1.png

VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #4 
The 2nd screen shot is not 0.006, I know the line shows 0.006 when the edit box is open, but if you cancel it reverts back to what is in that memory slot.   Did you change the value to something other than 0.006 and save or if you just cancelled then the TCR on the mod wasn't 0.006.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
GreekNick

Junior Member
Registered:
Posts: 5
Reply with quote  #5 
i posted the pics in the wrong order[smile]
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #6 
Quote:
Originally Posted by GreekNick
i posted the pics in the wrong order[smile]

Then if the 2nd pic is what on the mod it was not 0.006, look at the value on the right for 0.006 it is 3.440 at 800F, for the TCR you have it is 1.468 at 800 F, if my maths is right about a TCR of 0.001151.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
GreekNick

Junior Member
Registered:
Posts: 5
Reply with quote  #7 
Yes but why it is changing it to all other matirials
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #8 
I'll give it a go.

If EScribe is just opened and you put up the window to change the TCR of a particular material it will have .006 in the box by defaualt as well as show you the graph for that setting. Nothing is changed till you press"OK".
If EScribe wasn't been closed and you have changed the TCR of a material then it will show that number in the box by defaualt.
Again nothing is changed till you "OK" it


__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #9 
Quote:
Originally Posted by GreekNick
Yes but why it is changing it to all other matirials

I don't think it is, as I said when you open the box to enter a TCR it defaults to 0.006, but this is not the value that is currently stored you need to compare the curves.  Because the profiles are not a single ratio TCR they cannot convert most of them to a TCR without loosing data so they don't try, this can be confusing I know, but it is what it is.   FWIW may values have never changed on the 2 DNA 75s I have.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.