Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 2 of 2      Prev   1   2
nuatak

Junior Member
Registered:
Posts: 5
Reply with quote  #16 
Is this correct wiring?

Attached Images
jpeg image.jpg (92.48 KB, 215 views)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #17 
looks correct hard to tell for 100% sure from the pics. have you looked at this thread?

http://evolvapor.forumchitchat.com/post/add-led-functionality-to-the-1a-dna200-chips-7833594?highlight=vaporshark&pid=1290140201

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #18 
Sorry but im new to the resistors but why are you using a 100 ohm resistor . Can someone explain that in detail . Can you use a smaller ohm or bigger ohm resistor in its place . What are you using to calculate this for the dna 200 chip to know which one to use?
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #19 
Quote:
Originally Posted by Ononewheel2
Sorry but im new to the resistors but why are you using a 100 ohm resistor . Can someone explain that in detail . Can you use a smaller ohm or bigger ohm resistor in its place . What are you using to calculate this for the dna 200 chip to know which one to use?
you don't need a resistor for smd leds. that set up is for adding a push button with built in LED's here's a link if you want to add LED's. 

http://evolvapor.forumchitchat.com/post/add-led-functionality-to-the-1a-dna200-chips-7833594?highlight=led&pid=1290140201

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #20 
I don't want to use an smd led my plan was to wire a push button led directly to the board . It has 4 pins . 2 for the led pos neg 2 for the fire . I found this diagram that some said they are gonna use and this is how i want it . Is this possible? .

Attached Images
jpeg 2580953.jpg (92.48 KB, 57 views)

ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #21 
Quote:
Originally Posted by Ononewheel2
I don't want to use an smd led my plan was to wire a push button led directly to the board . It has 4 pins . 2 for the led pos neg 2 for the fire . I found this diagram that some said they are gonna use and this is how i want it . Is this possible? .
yes thats the correct diagram. i thought you wanted to use smd leds. sorry

TBH, i'm not 100% sure on the 100 ohm resistor. i think the LED voltage determines the resistor value. 

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #22 
Quote:
Originally Posted by jurdanas
LED shematika 01.png   

Try ?? or No ??


Did you happen to get this working the way you wanted it to and how do you know it needed 100ohm resistor
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #23 
Quote:
Originally Posted by ChunkyButt200
yes thats the correct diagram. i thought you wanted to use smd leds. sorry

TBH, i'm not 100% sure on the 100 ohm resistor. i think the LED voltage determines the resistor value. 

Do you happen to know what info i would need to find what resistor i would need for it to work .
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #24 
I found this online on a resistor calculator but what is the source voltage on the dna200 chip and where are you getting the info from.

Source voltage

diode forward voltage Help

diode forward current (mA) Help
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #25 
Quote:
Originally Posted by Ononewheel2
I found this online on a resistor calculator but what is the source voltage on the dna200 chip and where are you getting the info from. Source voltage diode forward voltage Help diode forward current (mA) Help
this what i found for a BLUE (same for WHITE) led mitec switch.     supply voltage (pack voltage)=12 diode forward voltage= 3.2 diode forward current=28mA.  i would open a ticket with evolv to make sure on what resistors you need, if any, for your led switch. 

your post (#22) is the correct wiring diagram.
series connection diagram

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Ononewheel2

Junior Member
Registered:
Posts: 8
Reply with quote  #26 
Finally finished my custom build . Heres the link for YouTube check it out let me know what you think
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #27 
Quote:
Originally Posted by Ononewheel2
Finally finished my custom build . Heres the link for YouTube check it out let me know what you think
very nice onewheel2. i'm glad you got the led working. take a few pics and post them in the "lets see your 200's" thread.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
cobalt327

Avatar / Picture

Member
Registered:
Posts: 35
Reply with quote  #28 
---------------
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.