Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
marquee

Junior Member
Registered:
Posts: 4
Reply with quote  #1 
I have been using my Hcigar VT 75 for quite a while. It has not been functioning well recently. When firing, some random 5 or 6 digit number is being displayed. More seriously, the resistance is not metered well anymore. Every time I try to fire, the resistance on the display is raised by huge steps. For instance, a resistance of 0.22 Ohm will soon be doubled, resulting in a failure to fire at all.

I have tried several firmware versions, but the problem occurs with any firmware version. I'm afraid that means I have a hardware problem.

Does anybody recognise the problem? Any suggestions how to solve it? Thanks in advance!
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
Most likely a grounding problem (lack of) at the board mounting screws and/or 510
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #3 
Will need some more info...wire type?...atomizer?....TC or power mode?...etc...Have you checked resistance stability with the Atomizer Analyzer in Escribe?
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.