Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #1 
Ребята может тема уже где то была, так что прошу не судить строго, а ткнуть носом куда надо. Проблема вот в чем: стал счастливым обладателем therion 166, и вот с чем столкнулся, при остатке заряда акумов менее 50% мод пишет chek battary, акумы новые, подскажите где что нужно поднастроить, а главное какие значения поставить.
всем откликнушимся спасибо.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
Check cell soft cutoff
cell soft cutoff.JPG
In device monitor check voltage drop under load (firing), see if one or both cells drop below cell soft cutoff.
Make sure battery connection are clean, even if they look clean.
cell voltage drop.JPG      


__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #3 
немного не понял про ячейку мягкой отсечки, можно по подробнее, просто не силен во всех этих граффиках. Спасибо
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #4 
Сделать так...

therion166 cell soft cutoff.PNG 

dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #5 
спасибо, сделал, буду пробовать
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #6 
[thumb][thumb]
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #7 
Interesting: note on my snip my cell soft cutoff is 2.91.
I was setting it to 2.85 and upon upload it would change to 2.91.
I now set it to 2.8 and it stayed at 2.8.
I hope the OP got it sorted

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #8 
Quote:
Originally Posted by dwcraig1
Interesting: note on my snip my cell soft cutoff is 2.91.
I was setting it to 2.85 and upon upload it would change to 2.91.
I now set it to 2.8 and it stayed at 2.8.
I hope the OP got it sorted


I've noticed that on other parameters as well...seems to round to a different value...[crazy]...

(dw corrected dw's spelling)
dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #9 
друзья спасибо, поставил нижнее значение 2.91 и все стало хорошо, но появилась другая проблема, при остатке заряда батареи 50% дает очень большую просадку, парю на 115Watt, а проседает до 85watt, это можно как то изменить или плохие батареи?
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #10 
Сколько Ом - ваша катушка
dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #11 
0,13
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #12 
.13 Ом при 115 ватт = 4.1v ... возможно слабые батареи...Попробуйте новый набор
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #13 
Quote:
Originally Posted by giz_60

(dw corrected dw's spelling)


I caught that to....[rofl]
dedasik

Junior Member
Registered:
Posts: 7
Reply with quote  #14 
спасибо большое, буду пробовать)))
giz_60

Avatar / Picture

Senior Member
Registered:
Posts: 796
Reply with quote  #15 
Просто запомните ... V = √ (W * R)
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.