Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
mandro

Avatar / Picture

Member
Registered:
Posts: 44
Reply with quote  #1 
I'm trying to change the display on my screen when in charging mode but nothing seems to be happening.
I can change the Default Field screen but the Charging Field screen just mirrors the default screen.
mikepetro

Senior Member
Registered:
Posts: 189
Reply with quote  #2 
You might have to wait about 60 seconds or so for it to change to the Charging Screens. First it has to exhaust whatever you have set in the "Active Time, and then also exhaust the "Idle Time" timers. By default the two together is about 66 seconds unless you changed one of them.
mandro

Avatar / Picture

Member
Registered:
Posts: 44
Reply with quote  #3 
Thanks for the reply mikepetro. I've been having a play around with software so I restored the default settings but it's still refusing to change the charging field display.
I've also noticed that I'm not getting the same live view in device monitor as the view shown in the simulator.
I'm going to un-reinstall the software and see if that solves the issues.
mandro

Avatar / Picture

Member
Registered:
Posts: 44
Reply with quote  #4 
I've un installed, re installed the escribe software but my board is still not showing the charge field options. I'm assuming that it's not the software because with the re installed software, when I click " connect and download settings" the downloaded settings from the board show the changed charge field settings but the board doesn't display them.
mikepetro

Senior Member
Registered:
Posts: 189
Reply with quote  #5 
Have you tried it without being connected via USB?
Can  you grab a screen capture of this part of your EScribe?

[image]
Legros

Junior Member
Registered:
Posts: 16
Reply with quote  #6 
You need to set charging brightness at less 35% to see it

Stock is 0%

Look at mikepetro picture in the left bottom is set to 80%
mandro

Avatar / Picture

Member
Registered:
Posts: 44
Reply with quote  #7 
Thanks Guys,
My screen tab was showing 0% charging brightness. I didn't notice it before.
Changed brightness and all is good now [smile]
BJ43

Junior Member
Registered:
Posts: 9
Reply with quote  #8 
Love the ability to monitor each cells charge.

20150713_091048_001.jpg 

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.