Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Alendaran

Junior Member
Registered:
Posts: 2
Reply with quote  #1 
Can I control wattage vs TC Modes on the until itself if I'm not near a computer?  I lost my manual.  Thanks 
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
The RX200 is not a DNA, if it is like the Evic mini 3 clicks to go to settings down button for scroll, up for select & adjust.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Alendaran

Junior Member
Registered:
Posts: 2
Reply with quote  #3 
I'm sorry but you are mistaken. The Wismec Reuleaux powered by Evolv DNA 200 is indeed a evolv dna machine and the menus do not work as in a regular RX200. I know because I have both.
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #4 
Most DNA200 are setup for Ni200 TC. The Reuleaux DNA200, the two I got had all eight profiles setup for Ni200 running in TC.

You don't have to use EScribe at all to use wattage mode (like Kanthal). The DNA200 like all mods I know about will kick out of TC mode with Kanthal, Nichrome, and other non-TC material. So you can use it that way if you want.

Or you can click 5 times to lock it. Then hold the plus and minus keys at the same time for a few seconds and it will popup the temperature. Now hold the plus down until it maxes out. Let up on the key and tap it down once more. Now it displays OFF. That means temperature mode is now off. Press the fire button five times to unlock and there you go. Adjust the wattage to your liking. Enjoy.
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #5 
Here is a manual I wrote that might also help you out. This shows you what you can do without EScribe.

DNA200 OPERATIONAL MANUAL

MAIN

Up/Down (5 sec) lock wattage or temp (Temp-Dominant dependent)
Up/Down (5 sec) then twice Up (or Down) to change Profile

LOCK (5 clicks)

Up/Down (5 sec) adjusts temp or wattage (Temp-Dominant dependent)
Fire/Up (5 sec) lock ohms
Fire/Dn (5 sec) Stealth/Normal
Fire/UD (5 sec) Change Material

dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #6 
Note that the above requires  2016-02-12 EScribe 1.0.39 or newer.
__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
jj6404

Member
Registered:
Posts: 67
Reply with quote  #7 
Quote:
Originally Posted by Alendaran
I'm sorry but you are mistaken. The Wismec Reuleaux powered by Evolv DNA 200 is indeed a evolv dna machine and the menus do not work as in a regular RX200. I know because I have both.


I'm sorry, but YOU are mistaken.  In your original post you said "RX200".  The Wismec RX200 is NOT a DNA device.  The Wismec Reuleaux IS a DNA device.  Get it?  If you have both then you should certainly know what both are called... (because it's on the box).
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #8 
Wismec's web site shows that the new version Reuleaux RX200 is not a DNA200 but a different chip as is the Reuleaux RX200S.  Their web site shows a device named the Reuleaux DNA200 which is a DNA200.

Wismec web site (Products page):  http://www.wismec.com/product/



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Conanthewarrior

Senior Member
Registered:
Posts: 187
Reply with quote  #9 
If it is an RX200 you are using, then it is the only way you will change settings due to it not connecting to Escribe. 

I think you have the DNA 200 Reuleaux, which I love, I do also own the cheaper RX200 and RX2/3, which are fine devices, just not on the same level as the Evolv powered version. 

If you connect a standard build, the device will detect it is not a TC wire, and you can adjust wattage, while if you put a TC build on it will be detected-you just need to choose what wire type you are using, you can do this by locking the device, holding all buttons and selecting the material, this is as long as you have the materials on the device. 
Eli

Junior Member
Registered:
Posts: 28
Reply with quote  #10 
I just found out about the battery setting cvs where in treads here (thank you) dna75 was easy but i do not see option for 18650 on this one, what do i put on program?
__________________
High definition gaming graphic dna electronic cigarette and cornoa but 'Ya No Fumo' 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.